In auto-negotiation mode, the port’s speed is determined by auto-negotiation. An error message is generated if you try to set the speed when auto-negotiation is enabled.
Syntax
set port speedmodule/port 10MB|100MB|1GB
Parameters
Parameter
Description
Possible Values
Default Value
module
Number of the module
port
Number of the port on the module. You can also specify a range of ports separated by a dash. For example:10/35-6 for both ETH LAN ports on the front panel.
10MB
Keyword that sets the specified port to a speed of 10 Mbps
100MB
Keyword that sets the specified port to a speed of 100 Mbps
1GB
Keyword that sets the specified port to a speed of 1 Gbps
User level
read-write
Context
general
Example
To configure port 6/5 to 100 Mbps
Gxxx-001(super)# set port speed 6/5 100MB
Port 6/5 speed set to 100 Mbps.
