copy ftp module

Last Updated : Dec 22, 2015 |

This command downloads the Media Module firmware to the respective media modules on a gateway, from an FTP server into a media module. The FTP command prompts for the username and password after the command is entered.

Syntax

copy ftp module <filename> {<ip-addr>|<IPv6–addr>[%zone-id]|<hostname>} <module_number>

Parameters

Parameter

Description

Possible Values

Default Value

filename

The file name on the server

ip-addr

The IPv4 address of the server

IPv6–addr

The IPv6 address of the server

%zone-id

VLAN ID

1 — 4,090

module_ number

The Media Module number

hostname

Hostname of the server

module_ number

The Media Module number

User level

read-write

Context

general

Example

To download the firmware file, mm.img, into media module 3 from the FTP server at IP address 135.64.10.33 using login dan:

Gxxx-001(super)# copy ftp module mm.img 135.64.10.33 3
Username: dan
Password:

To download the firmware file, mm.img, into media module 3 from the FTP server at IP address 2001:db8::9531:8699 using login dan:

Gxxx-001(super)# copy ftp module mm.img 2001:db8::9531:8699 3
Username: dan
Password: