test voip-dsp

Last Updated : Nov 06, 2012 |

Starts a BTR test on the VoIP engine or a VoIP subsystem.

Also refer to busyout voip-dsp and release voip-dsp.

Note:

If you do not run the busyout voip-dsp command before the test voip-dsp command, only non-disruptive tests run.

Status changes during the test create SNMP traps.

Syntax

test voip-dsp [dsp-id[/core-id]]

Parameters

Parameter

Description

Possible Values

Default Value

dsp-id

The slot number of the VoIP DSP childboard

1-4

core-id

The core ID

1-4

User level

read-write

Context

general

Examples

To start a BTR test on all DSPs at once:

G450-001(super)# test voip-dsp
DSP      Core                     Result                Error Code
----     -----                    ------------          -----------------
1          1                         PASS
1          2                         FAIL               Error Code #1
1          3                         FAIL               Error Code #3
1          4                         PASS
2          1                         PASS
3          -                         Not Present
4          -                         Not a VoIP-DSP childboard
Error Codes
1       Loopback test 1 failed 
2       Loopback test 2 failed 
3       Loopback test 3 failed 
4       Loopback test 4 failed 
5       Loopback test 5 failed 
6       Ping test failed
7       Core not responding

To launch a BTR test on core 2 in DSP 1:

G450-001(super)# test voip-dsp 1/2
DSP CORE TEST RESULTS
DSP   Core                     Result              Error Code
----  -----                    -------             ------------
1     2                         FAIL               Error Code #1