show station

Last Updated : Jun 08, 2018 |

Displays extension-specific SLS data parameters. If no extension parameters are specified, information about all extensions is displayed.

Syntax

show station list

Parameters

Parameter

Description

Possible Values

Default Value

list

The extension-specific SLS data parameters to list:

  • all – Lists all administered extensions

  • extension – Lists only the numbered extension

  • extension + n – Lists the numbered extension + n entries

all

extension

extension + n

all

User level

read-write

Context

sls

Example

To display extension-specific SLS data parameters:

Gxxx-001(super-sls)# show station
Extension Type       Port            Cor        Trk-Des Exp-Mod Flash Passwd
--------- ----       ----            ---        ------- ------- ----- ------
49138     ip4620     xxx.xxx.xxx.xxx unrestr    yes     no      - ******
49139     ip4610sw   xxx.xxx.xxx.xxx unrestr    yes     yes     - ******
49140     analog2500 v305            internal   yes     -       yes   ******
Name = Joe Smith
Note:

If an IP station or Softphone is currently registered when the command is run, the Port column shows the IP address of the IP station or Softphone.

Output fields

Field

Description

Extension

The extension number of the phone (1-16 digits)

Type

The station type

Port

The module/port location

Cor

The Class of Restriction. Possible classes include:

  • emergency

  • internal

  • local

  • toll

  • unrestricted

Trk-Des

Indicates whether to permit (yes) or deny (no) the call

Exp-Mod

Yes means that an expansion module is administered for this station; no means that there is no expansion module associated with this station

Flash

Yes means that SLS will recognize the switchhook flash on this station; no means that flashing the switchhook has no effect

Passwd

Asterisks (*) indicate an administered password. See set password for password requirements on IP endpoints. If the field is blank, no password is administered for this extension.