show mgc list

Last Updated : May 31, 2021 |

Displays the list of available Media Gateway Controllers, their IP addresses or their FQDN.

The show mgc list command also shows whether SLS survivability is enabled or disabled. If SLS is enabled, the following message appears at the end of the MGC list:

SLS

If SLS is disabled, the following message appears at the end of the MGC list:

SLS disabled

Syntax

show mgc list

User level

read-only

Context

general

Example

To display the list of media gateway controllers:

# show mgc list
PRIMARY MGC HOST, Primary Search Time : 1 min(s)
IPv4 Address         IPv6 Address
-------------------- ----------------------------------------------
-- 10.129.176.47		--  Not Available

SECONDARY MGC HOST
IPv4 Address         IPv6 Address
-------------------- ----------------------------------------------
-- Not Available --  -- Not Available --
-- Not Available --  -- Not Available --
-- Not Available --  -- Not Available --

sls disabled

Done!

Output fields

Field

Description

CONFIGURED MGC HOST

Lists five administered elements:

  • The first four are the IP addresses/FQDNs of the call controller in the administered list as configured by the set mgc list command

    Note:

    The table will display "Not Available" for the non-configured entries

  • The fifth element is either:

    • SLS — SLS is enabled

    • SLS disabled— SLS is disabled