set digit-handling

Last Updated : Nov 06, 2012 |

Defines how inbound or outbound calls handle the reception or transmission of the dialed pattern in SLS.

Note:

This command applies only to ISDN trunks.

Syntax

set digit-handling method

Parameters

Parameter

Description

Possible Values

Default Value

method

How the inbound/outbound calls handle the reception/transmission of the dialed pattern.

Enbloc requires sending the entire collected digit string in one block.

Overlap sends the digits one at a time as they are collected.

  • If you specify enbloc for transmission of outbound calls, the dialing technique should be ARS.

  • If you are employing TAC dialing for a trunk-group, set the transmission for outbound trunk calls to overlap.

enbloc-enbloc

enbloc-overlap

overlap-enbloc

overlap-overlap

enbloc-enbloc

User level

read-write

Context

sls > trunk-group

Example

To define that inbound and outbound calls handle reception and transmission as enbloc and enbloc respectively:

Gxxx-001 (sls-trunk-group-<tgnum>)# set digit-handling enbloc-enbloc