set interface

Last Updated : Nov 06, 2012 |

Specifies the glare-handling convention for a DS1 or BRI link in SLS. This command also determines the polarity of the ISDN Layer 2 (LAPD) protocol operation.

Note:

For a DS1 circuit, this command specifies the glare-handling convention for the set connect command that has been administered as pbx at the far-end of the DS1 link.

This command is valid only for a DS1 or BRI circuit.

Syntax

set interface glare-mode

Parameters

Parameter

Description

Possible Values

Default Value

glare-mode

The glare-handling convention for a DS1 or BRI link.

For non-QSIG calls:

  • network – If the gateway is connected to a host computer and encounters glare, it overrides the far-end

  • user – If the gateway is connected to a public network and encounters glare, it releases the circuit

For QSIG calls:

  • peerMaster – SLS overrides the other end when glare occurs

  • peerSlave – SLS releases the circuit when glare occurs

network

user

peerMaster

peerSlave

user

User level

read-write

Context

sls > ds1

sls > bri

Example

To specify the glare-handling convention as network:

Gxxx-001 (sls-ds1-<port address>)# set interface network