Clear the frame relay counters.

Enter Serial interface or sub-interface configuration mode.

Set the encapsulation mode for a Serial interface.

Associate a Virtual Channel with a named QoS or Traffic shaping template (map-class).

Associate a frame relay Virtual Channel with the current interface.

Set the number of status enquiry intervals that pass before issuing a full status enquiry message.

Set the maximum number of unanswered status enquiries the equipment accepts before declaring the interface down.

Set the number of status polling intervals over which the error threshold is counted (the monitored event count).

Manually define the type of the Local Management Interface (LMI) to use.

Assign Virtual Channels to priority classifications, for supporting traffic separation.

Turn on or turn off traffic shaping and frame relay fragmentation.

Configure an IP address and mask for the interface.

Create a QoS template which can later be assigned to DLCIs.

Configure the committed burst size in bits, for the outbound direction.

Configure the excess burst size in bits, for the outbound direction.

Configure the Committed Information Rate in bits per second, for the outbound direction.

Enable FRF.12 fragmentation and configure the fragment size, or disable FRF.12 fragmentation.

Display a summary table of frame relay sub-interfaces and DLCIs associated with the sub-interfaces.

Display information on all PVCs known to the device, in table form.

Display interface configuration and statistics for a particular interface or all interfaces.

Display the map-class frame relay table.

Display traffic shaping and Frame Relay Traffic Shaping configuration information.

Display information about the real-time status of traffic-shaping and Frame Relay Traffic Shaping queues.

Display traffic shaping and Frame Relay Traffic Shaping statistics.