clear mgc list |
Removes one or more MGCs from the MGC list. |
session |
Open a telnet connection to the MGC. |
set icc-monitoring |
Enable or disable heartbeat monitoring of an MGC in ICC or LSP mode. |
set server-blade-monitoring |
Control the hearbeat monitoring of an S8300 server. |
set mediaserver |
Set the MGC management address and ports. |
set mgc list |
Create a list of valid Media Gateway Controllers. |
set reset-times |
Set the time-out for the Branch Gateway’s search for the primary MGC, or search for the other MGC’s on the MGC list, or configure the point at which the primary MGCs in the list end and the LSPs begin. |
show icc-monitoring |
Display the status of the ICC or LSP monitoring process. |
show server-blade-monitoring |
Display the monitoring process of an S8300 server. |
show mgc |
Display the state and setup parameters of the currently active MGC. |
show mgc list |
Display the IP addresses of the MGCs on the MGC list. |
show recovery |
Display the Branch Gateway monitoring and recovery setup. |
