tcp keepalive

Last Updated : Jun 04, 2021 |

Configures the timer after which, the gateway sends a TCP ACK packet if no data is sent over the MGSBC management link to Avaya Session Border Controller (ASBCE). When the gateway is in Edge Mode, the MGSBC management link must be up for the gateway to accept SSH diagnostic operations and report SNMP Trap messages. If data traffic is light, the gateway must send TCP Keep-Alive messages to keep the NAT port open.

Note:

This command is applicable when the gateway is in Edge Mode.

Syntax

tcp keepalive [timer value]

Parameters

Parameter

Description

Possible Values

Default Value

timer value

Length of the timer window for sending RTP packets.

15 - 300 seconds

60 seconds
Note:

When you execute the command without a [timer value], the current administered value is displayed on the CLI.

User level

Administrator: read-write

End-user: read-only

Context

general