clear controller counters |
|
Reset the controller counters. |
controller |
|
Enter configuration mode for a specific controller. |
|
cablelength long (T1) |
Set transmit and receive levels for a cable longer than 655 feet. |
|
cablelength short (T1) |
Set transmit levels for a cable of length 655 feet or shorter. |
|
channel-group |
Create a channel group logical interface for a PPP or Frame Relay session. |
|
clock source |
Set the clock source for an E1 or T1 controller. |
|
fdl |
Define the type of Facility Data Link loopback that the remote line is requested to enter. |
|
framing |
Set the frame type for an E1 or T1 data line. |
|
linecode (E1) |
Set the type of line-code transmission for the E1 line. |
|
linecode (T1) |
Set the type of line-code transmission for the T1 line. |
|
loopback |
Activate or deactivate loopback mode for an E1 or T1 line. |
|
remote |
Reset the far end counters on a T1 line. |
ds-mode |
|
Set the mode of the controller to e1 or t1. |
interface serial |
|
Enter Serial interface or sub-interface configuration mode. |
|
ip address |
Configure the IP address and subnet mask of the interface. |
show controllers |
|
Display status information about a controller interface. |
show controllers remote |
|
Display controller statistics from a peer station. |
show ds-mode |
|
Display the current mode of the controller. |
