dscp (object tracking)

Last Updated : Nov 06, 2012 |

Sets the DSCP value in the IP header of an RTR operation’s probe packets. Use no dscp to restore the value to the default value of 48.

Note:

Run the type command to define the RTR operation’s probing method and the IP address of the remote device before using this command.

Syntax

[no] dscp dscp


Parameter	Description	Possible Values	Default Value
dscp	The dscp value	0-63	48

read-write

rtr, rtr type

To set the DSCP value for RTR 1:

Gxxx-001(config-rtr icmp 1)# dscp 42

Send Feedback