Avaya G450 Branch Gateway CLI Reference

set echo-cancellation config analog

Last Updated : Nov 06, 2012 |

Configures echo cancellation on analog lines or trunks.

Note:

The recommended setting for all analog trunks and lines is the default configuration 31.

Syntax

set echo-cancellation config analog slot [port] config1 config2

Parameters


Parameter	Description	Possible Values	Default Value
slot	Number of the slot, represented as a number preceded by the letter v . For example, slot 1 is represented as v1.
port	Number of the port on the module, represented as two digits. For example, port 2 is represented as 02. If you do not specify a port, the command applies to all ports in this slot.
config1	A number representing an echo cancellation configuration, as shown in the next table. The recommended setting is the default configuration. Do not change this setting unless instructed to do so for diagnostic purposes only.	0-255	31
config2	Reserved for future use	0-255	0

Table 1: Analog Trunk/Line Echo Cancellation Settings
Setting	Mode	Description	Comfort Noise Insertion	Call Start-up
0	NLP option 1	Basic NLP Operation	ON	Full reset
1	NLP option 2	More aggressive echo control but less open	ON	Full reset
2	NLP option 3	More full-duplex but less echo control	ON	Full reset
3-7	Reserved	WARNING!: UNEXPECTED RESULTS
8	NLP option 1	Basic NLP Operation	OFF	Full reset
9	NLP option 2	More aggressive echo control but less open	OFF	Full reset
10	NLP option 3	More full-duplex but less echo control	OFF	Full reset
11-14	Reserved	WARNING!: UNEXPECTED RESULTS
15	NLP off	NLP disabled	OFF	Full reset
16	NLP option 1	Basic NLP Operation	ON	No reset
17	NLP option 2	More aggressive echo control but less open	ON	No reset
18	NLP option 3	More full-duplex but less echo control	ON	No reset
19-23	Reserved	WARNING!: UNEXPECTED RESULTS
24	NLP option 1	Basic NLP Operation	OFF	No reset
25	NLP option 2	More aggressive echo control but less open	OFF	No reset
26	NLP option 3	More full-duplex but less echo control	OFF	No reset
27-30	Reserved	WARNING!: UNEXPECTED RESULTS
31	NLP off	NLP disabled	OFF	Partial reset
32	NLP option 1	Basic NLP Operation	ON	Partial reset
33	NLP option 2	More aggressive echo control but less open	ON	Partial reset
34	NLP option 3	More full-duplex but less echo control	ON	Partial reset
35 - 39	Reserved	WARNING!: UNEXPECTED RESULTS
40	NLP option 1	Basic NLP Operation	OFF	Partial reset
41	NLP option 2	More aggressive echo control but less open	OFF	Partial reset
42	NLP option 3	More full-duplex but less echo control	OFF	Partial reset
43 - 46	Reserved	WARNING!: UNEXPECTED RESULTS
47	NLP off	NLP disabled	OFF	Partial reset
48-255	Reserved	WARNING!: UNEXPECTED RESULTS

User level

read-write

Context

general

Examples

To configure line or trunk echo cancellation in port 1 of slot 3 to configuration 31:

Gxxx-001(super)# set echo-cancellation config analog v301 31

Send Feedback

AVAYA DOCUMENTATION CENTER

No results found