Specifies the crosstalk port. The port must be on the same board as the port target of the test, but it must be a different port from the port under test.
Syntax
set crosstalk-port {slot port}
Parameters
Parameter
Description
Possible Values
Default Value
slot
Number of the slot, represented as a number preceded by the letter v. For example, slot 1 is represented as v1.
A slot with an analog media module
port
Number of the port on the module, represented as two digits. For example, port 2 is represented as 02.
Any analog trunk port, including DID trunk ports
User level
admin
Context
analog-test-profile
Example
Gxxx-001(analog-test-measure3)# set crosstalk-port v305
