Sets the Spanning Tree priority level of a port. This value defines the priority of a port to be blocked in case two ports with the same cost cause a loop.
Syntax
set port spantree priority module/port value
Parameters
Parameter
Description
Possible Values
Default Value
module
The module number
port
The port number
value
Number representing the priority of the port. 0 is the highest priority. A port with a lower priority will be blocked.
0-240 (in multiples of 16)
128
User level
read-write
Context
general
Example
To set the priority for port 6/5 to 128:
Gxxx-001# set port spantree priority 6/5 128
port 6/5 spantree priority is 128
