The USB interface always exists, but is disabled by default. Use the no shutdown command to enable the interface.
The default settings for the USB-modem interface are:
Interface status |
DOWN |
IP address |
10.3.0.3 |
Netmask |
255.255.255.0 |
timeout |
no timeout |
PPP speed |
38400 bps |
Async modem-init-string |
AT S7=45 S0=2 L1 V1 X4 &c1 E0 Q0
|
Important:
This command is not allowed when FIPS mode is enabled.
