Specifies which IKE Phase-1 mode to use when communicating with the peer. Use no initiate mode to restore the default setting, which is main mode.
Note:
Aggressive mode is one of the prerequisites for working with dynamic IP addresses.
Syntax
[no] initiate mode {main | aggressive | none}
Parameters
Parameter
Description
Possible Values
Default Value
main
Keyword specifying that the device operate in IKE main mode
aggressive
Keyword specifying that the device operate in IKE aggressive mode. Specify this option when local IP is dynamic.
none
Keyword specifying that the device act as an IKE Phase-1 responder. Specify this option only when communicating with a dynamically addressed remote peer.
