interface {dialer | serial | loopback | FastEthernet | tunnel | VLAN}

See IP interface configuration

Enter the interface configuration mode for a Dialer, Serial, Loopback, FastEthernet, Tunnel, or VLAN interface

Activate a specific QoS list, for a specific direction, on the current interface

Test the action of a policy on a simulated packet

Display the attributes of a specific QoS list or all QoS lists for the current interface

Copy an existing policy list to a new list

Enter configuration mode for the specified QoS list, and create the list if it does not exist

Enter the configuration mode for one of the current list’s composite operations

Set the CoS priority value for the current composite operation

Set the DSCP value for the current composite operation

Assign a name to the current composite operation

Display the attributes of the current composite operation

Set the cookie for the current list

Enter the DSCP table entry context for a particular DSCP value for the current QoS list

Specify the composite operation to execute for packets with the specified DSCP value

Assign a name to the current DSCP table entry

Display the parameters of the current DSCP table entry

Enter configuration mode for a specified policy rule or, if the rule does not exist, create it and enter its configuration mode

Assign the specified composite operation to the current rule

Apply the current rule to packets with the specified destination IP address

Apply the current rule to packets with the specified DSCP value

Apply the current rule for non-initial fragments only

Apply the current rule to a specific type of ICMP packet

Apply the current rule to packets with the specified IP protocol

Display the parameters of the composite operation assigned to the current rule

Display the current list’s DSCP table

Display the attributes of the current rule

Apply the current rule to packets from the specified source IP address

Apply the current rule to TCP packets with the specified destination port

Apply the current rule to TCP packets from ports with specified source port

Apply the rule to UDP packets with the specified destination port

Apply the rule to UDP packets from the specified source port

Assign a name to the current list

Specify the owner of the current list

Specify which priority tag the current QoS list uses for data flows

Display all composite operations configured for the list

Display the current list’s DSCP table

Display the rules configured for the current list attributes of a specific rule

Display the attributes of the current list, including its rules

Display the attributes of a specific QoS list or all QoS lists