set lldp re-init-delay |
Set the delay from when an LLDP is disabled on a port until re-initialization is attempted. |
set lldp system-control |
Enable or disable the LLDP application globally per device or stack. |
set lldp tx-delay |
Set the minimal delay in seconds between successive LLDP frame transmissions, on each port. |
set lldp tx-hold-multiplier |
Set the multiplier on the interval that determines the actual TTL value sent in an LLDP frame. |
set lldp tx-interval |
Set the interval at which the device transmits LLDP frames. |
set port lldp |
Change the administrative LLDP status of a port. |
set port lldp tlv |
Enable or disable the transmission of the optional TLVs on a per port basis. |
show lldp |
Display the LLDP information received on each port. |
show lldp config |
Display the global LLDP configuration. |
show port lldp config |
Display port-level LLDP configuration. |
show port lldp vlan-name config |
Show the VLANs that are being transmitted on a specific port. |
