Specifies whether the SLS analog trunk call state machine is to monitor the trunk for the presence of a busy tone for the entire duration of both incoming and outgoing calls. If a busy tone is detected, the SLS call state machine will disconnect the call.
Note:
This command applies only to analog loop-start trunks.
Syntax
set busy-disconnect {yes | no}
Parameters
Parameter
Description
Possible Values
Default Value
yes
Keyword indicating that the SLS Q.931 state machine will connect a tone detector to this time slot for the purpose of detecting the busy tone signal. Upon detecting a busy tone signal, the SLS call processing directs the trunk to initiate a disconnect sequence by opening the loop.
no
Keyword indicating that no busy tone detection be applied. This is the default value.
User level
read-write
Context
sls > trunk-group
Example
To specify that the SLS analog trunk call state machine monitor the analog loop-start trunk for the presence of a busy tone:
Gxxx-001 (sls-trunk-group-<tgnum>)# set busy-disconnect yes
