clear utilization cpu |
Disable CPU utilization measurements. |
set utilization cpu |
Enable CPU utilization measurements. |
show download |
Display the status of the current file copy process to the device. |
show faults |
Display information about currently active faults. |
show mg list_config |
Display the current hardware and firmware configurations for the installed Branch Gateway equipment. |
show mgc |
Display information about the Media Gateway Controller with which the Branch Gateway is registered. |
show mm |
Display information about media modules that are installed on the Branch Gateway. |
show module |
Display brief information about the media modules installed in the Branch Gateway. |
show recovery |
Display the Branch Gateway monitoring and recovery setup. |
show restart-log |
Display information about the last time that the Branch Gateway was reset. |
show system |
Display information about the Branch Gateway. |
show temp |
Display the device temperature. |
show timeout |
Display the amount of time in minutes the terminal remains idle before timing out. |
show upload |
Display the status of the current file copy process from the device. |
show utilization |
Display information about CPU and memory usage on the Branch Gateway. |
show voltages |
Display power supply voltages. |
test led |
Test the system ALM, MDM and CPU LEDs on the front panel of the Branch Gateway. |
