copy announcement-file usb

Last Updated : Nov 06, 2012 |

Uploads an announcement file from the gateway to the USB mass storage device.

Note:

If you install increased RAM, the command works only if an announcement file system exists. An announcement file system is created when one of the following occurs:

  • The gateway is registered to Communication Manager, and at the SAT interface of the Communication Manager, you enter enable announcement-board.

  • You run a backup or restore operation (without reset).

Syntax

copy announcement-file usb source-filename destination-usb-device [destination-filename]

Parameters

Parameter

Description

Possible Values

Default Value

source-filename

The logical name for the source file

destination usb-device

The destination USB mass storage device

usb-device0

destination-filename

The destination file name and path

User level

read-write

Context

general

Example

To upload local_announcement2.wav from the gateway to usb-device0 and call it remote_announcement2.wav:

Gxxx-001(super)# copy announcement-file usb local_announcement2.wav
usb-device0 remote_announcement2.wav