Removing the existing servers from the cluster

Last Updated : May 05, 2025 |
Prolog information
Metadata
Keywords:
This procedure is service impacting for the targeted cluster. You should perform it during scheduling maintenance if possible.
  1. In System Manager, click ElementsAvaya Breeze®.
  2. Click Cluster Administration.
  3. Select the targeted cluster and click Edit.
  4. Navigate to the Servers tab.
  5. For a single node cluster:
    1. Select the Avaya Breeze® platform server by selecting the blue X next to the assigned server.
    2. click Commit.
  6. For a two-node cluster:
    1. On the General tab, under Cluster Attributes, disable Load Balancer if enabled.
    2. On the General tab, disable Enable Database Auto Switchover if enabled.
    3. If using the cluster database feature:
      ADDITIONAL INFORMATION:
      1. Remove the standby server by choosing the blue X next to the server designated as S (standby).
      2. Remove the active server by choosing the blue X next to the server designated as A (active).
      3. Click Commit.
  7. For a cluster with more than three nodes:
    1. On the General tab, under Cluster Attributes, disable Load Balancer if enabled.
    2. On the General tab, disable Enable Database Auto Switchover if enabled.
    3. If using the cluster database feature:
      ADDITIONAL INFORMATION:
      1. Remove the server instances without an A or S designation by choosing the blue X next to those servers.
      2. Remove the standby server by choosing the blue X next to the server designated as S (standby).
      3. Remove the active server by choosing the blue X next to the server designated as A (active).
      4. Click Commit.
  8. Confirm the warnings regarding the service disrupting action.
  9. Wait until all services have uninstalled.
  10. To check the uninstall process, go to Service ManagementServices.
Next steps
Shut down the servers.