avCmListMeasCoverLstHr Group

Last Updated : Oct 26, 2020 |

MIB group name	OID	Type
avCmListMeasCoverLstHr	enterprises.6889.2.73.8.1.160

Description

The avCmListMeasCoverLstHr MIB Group uses the list measurements coverage-path last-hour command to retrieve coverage-path data from the last hour.

Releases Supported

7.1 and later

Polling Type

Performance/Utilization

Polling Interval

Not more than once every 6 minutes. However, no more than once an hour is recommended.

Default Caching Interval

600 seconds

Timeout Interval

Initial Timeout should be set to 20 seconds.

Retry Interval

Initial Retry should be set to 3.

Limitations

Yellow/Medium - The data collected by this MIB Group may have some impact on the system.

Associated Communication Manager Commands:

MIB group name	Bash/SAT	Associated command	Form/Report name
avCmListMeasCoverLstHr	SAT	list measurements coverage-path last-hour	COVERAGE PATH MEASUREMENTS

Reference Document

A detailed description of the command and form can be found in the Avaya Aura® Communication Manager Reports document. This document can be downloaded from http://support.avaya.com/document/.

Command permissions or user profile

No special permissions needed.

Objects


Object Name	OID	R/W	Type	Field Name	Description
Form/Report name	OID	R/W	Type	Field Name	Description
avCmListMeasCoverLstHrTable	.1	n/a	SEQUENCE OF AvCmListMeasCoverLstHrEntry	n/a	A list of the avCmListMeasCoverLstHr entries.
	.1	n/a	SEQUENCE OF AvCmListMeasCoverLstHrEntry	n/a	A list of the avCmListMeasCoverLstHr entries.
avCmListMeasCoverLstHrEntry	.1.1	n/a	AvCmListMeasCoverLstHrEntry	n/a	A avCmListMeasCoverLstHr entry containing objects of the avCmListMeasCoverLstHr information sent by the switch.
	.1.1	n/a	AvCmListMeasCoverLstHrEntry	n/a
avCmListMeasCoverLstHrCoveragePathIdx	.1.1.1	n/a	Integer32 (0..9999)	n/a	An object containing the index based on coverage paths.
	.1.1.1	n/a	Integer32 (0..9999)	n/a	An object containing the index based on coverage paths.
avCmListMeasCoverLstHrCoveragePath	.1.1.2	R	Integer32 (0..9999)	Path No.	An object containing the measured coverage path.
COVERAGE PATH MEASUREMENTS	.1.1.2	R	Integer32 (0..9999)	Path No.	An object containing the measured coverage path.
avCmListMeasCoverLstHrRunDate	.1.1.3	R	SnmpAdminString (SIZE (0..27))	Date	An object containing the Date the command was executed.
COVERAGE PATH MEASUREMENTS	.1.1.3	R	SnmpAdminString (SIZE (0..27))	Date	An object containing the Date the command was executed.
avCmListMeasCoverLstHrMeasHour	.1.1.4	R	Integer32 (0..9999)	Meas Hour	An object containing the hour for which these measurements apply (based on a 24-hour clock).
COVERAGE PATH MEASUREMENTS	.1.1.4	R	Integer32 (0..9999)	Meas Hour
avCmListMeasCoverLstHrCallsOffrd	.1.1.5	R	Integer32 (0..99999)	Calls Offrd	An object containing the number of calls offered to the coverage path.
COVERAGE PATH MEASUREMENTS	.1.1.5	R	Integer32 (0..99999)	Calls Offrd
avCmListMeasCoverLstHrCritAct	.1.1.6	R	Integer32 (0..999)	Criteria Act	An object containing the number of calls offered to the coverage path due to the principal being active.
COVERAGE PATH MEASUREMENTS	.1.1.6	R	Integer32 (0..999)	Criteria Act
avCmListMeasCoverLstHrCritBsy	.1.1.7	R	Integer32 (0..999)	Criteria Bsy	An object containing the number of calls offered to the coverage path due to the principal being busy.
COVERAGE PATH MEASUREMENTS	.1.1.7	R	Integer32 (0..999)	Criteria Bsy
avCmListMeasCoverLstHrCritDA	.1.1.8	R	Integer32 (0..999)	Criteria DA	An object containing the number of calls offered to the coverage path because the principal did not answer the call after the administered number of rings.
COVERAGE PATH MEASUREMENTS	.1.1.8	R	Integer32 (0..999)	Criteria DA
avCmListMeasCoverLstHrCritAll	.1.1.9	R	Integer32 (0..999)	Criteria All	An object containing the number of calls offered to the coverage path due to the principal's use of Cover All.
COVERAGE PATH MEASUREMENTS	.1.1.9	R	Integer32 (0..999)	Criteria All
avCmListMeasCoverLstHrCritSAC	.1.1.10	R	Integer32 (0..999)	Criteria SAC	An object containing the number of calls offered to the coverage path due to the principal's use of Send All Calls or the calling party using Go To Coverage.
COVERAGE PATH MEASUREMENTS	.1.1.10	R	Integer32 (0..999)	Criteria SAC
avCmListMeasCoverLstHrCallBack	.1.1.11	R	Integer32 (0..99999)	Cback	An object containing the number of calls offered to the coverage path where the calling party used LWC or ACB before a coverage point answered the call.
COVERAGE PATH MEASUREMENTS	.1.1.11	R	Integer32 (0..99999)	Cback
avCmListMeasCoverLstHrPoint1Ans	.1.1.12	R	SnmpAdminString (SIZE (0..5))	Point1 Ans	An object containing the total number of calls answered by the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.12	R	SnmpAdminString (SIZE (0..5))	Point1 Ans
avCmListMeasCoverLstHrPoint2Ans	.1.1.13	R	SnmpAdminString (SIZE (0..5))	Point2 Ans	An object containing the total number of calls answered by the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.13	R	SnmpAdminString (SIZE (0..5))	Point2 Ans
avCmListMeasCoverLstHrPoint3Ans	.1.1.14	R	SnmpAdminString (SIZE (0..5))	Point3 Ans	An object containing the total number of calls answered by the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.14	R	SnmpAdminString (SIZE (0..5))	Point3 Ans
avCmListMeasCoverLstHrPoint4Ans	.1.1.15	R	SnmpAdminString (SIZE (0..5))	Point4 Ans	An object containing the total number of calls answered by the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.15	R	SnmpAdminString (SIZE (0..5))	Point4 Ans
avCmListMeasCoverLstHrPoint5Ans	.1.1.16	R	SnmpAdminString (SIZE (0..5))	Point5 Ans	An object containing the total number of calls answered by the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.16	R	SnmpAdminString (SIZE (0..5))	Point5 Ans
avCmListMeasCoverLstHrPoint6Ans	.1.1.17	R	SnmpAdminString (SIZE (0..5))	Point6 Ans	An object containing the percentage of time during the measured interval that all VC ports are unavailable to carry a new call.
COVERAGE PATH MEASUREMENTS	.1.1.17	R	SnmpAdminString (SIZE (0..5))	Point6 Ans
avCmListMeasCoverLstHrPoint1Aband	.1.1.18	R	SnmpAdminString (SIZE (0..5))	Point1 Abd	An object containing the total number of calls abandoned by the caller while ringing at the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.18	R	SnmpAdminString (SIZE (0..5))	Point1 Abd
avCmListMeasCoverLstHrPoint2Aband	.1.1.19	R	SnmpAdminString (SIZE (0..5))	Point2 Abd	An object containing the total number of calls abandoned by the caller while ringing at the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.19	R	SnmpAdminString (SIZE (0..5))	Point2 Abd
avCmListMeasCoverLstHrPoint3Aband	.1.1.20	R	SnmpAdminString (SIZE (0..5))	Point3 Abd	An object containing the total number of calls abandoned by the caller while ringing at the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.20	R	SnmpAdminString (SIZE (0..5))	Point3 Abd
avCmListMeasCoverLstHrPoint4Aband	.1.1.21	R	SnmpAdminString (SIZE (0..5))	Point4 Abd	An object containing the total number of calls abandoned by the caller while ringing at the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.21	R	SnmpAdminString (SIZE (0..5))	Point4 Abd
avCmListMeasCoverLstHrPoint5Aband	.1.1.22	R	SnmpAdminString (SIZE (0..5))	Point5 Abd	An object containing the total number of calls abandoned by the caller while ringing at the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.22	R	SnmpAdminString (SIZE (0..5))	Point5 Abd
avCmListMeasCoverLstHrPoint6Aband	.1.1.23	R	SnmpAdminString (SIZE (0..5))	Point6 Abd	An object containing the total number of calls abandoned by the caller while ringing at the specified point.
COVERAGE PATH MEASUREMENTS	.1.1.23	R	SnmpAdminString (SIZE (0..5))	Point6 Abd

Send Feedback

AVAYA DOCUMENTATION CENTER

No results found