AVAYA DOCUMENTATION CENTER
Find answers to your technical questions and learn how to use our products
No results found
Search suggestions:
- Use fewer tags and filters.
- Use different search terms.
Filters
AVAYA DOCUMENTATION CENTER
Find answers to your technical questions and learn how to use our products
No results found
Search suggestions:
- Use fewer tags and filters.
- Use different search terms.
Filters
Avaya Aura® Communication Manager SNMP Administration and Reference Guide
avCmListMeasLoadBalTotalYest Group
Last Updated : Oct 26, 2020 |
MIB group name |
OID |
Type |
|---|---|---|
avCmListMeasLoadBalTotalYest |
enterprises.6889.2.73.8.1.130 |
Description
The avCmListMeasLoadBalTotalYest MIB Group uses the list measurements load-balance total yesterday command to retrieve load data for port-networks from yesterday.
Releases Supported
7.1 and later
Polling Type
Performance/Utilization
Polling Interval
Not more than once a day because the data is only updated near the beginning of the day.
Default Caching Interval
600 seconds
Timeout Interval
Initial Timeout should be set to 20 seconds.
Retry Interval
Initial Retry should be set to 3.
Limitations
Yellow/Medium - The data collected by this MIB Group may have some impact on the system.
Associated Communication Manager Commands:
MIB group name |
Bash/SAT |
Associated command |
Form/Report name |
|---|---|---|---|
avCmListMeasLoadBalTotalYest |
SAT |
list measurements load-balance total yesterday |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
Reference Document
A detailed description of the command and form can be found in the Avaya Aura® Communication Manager Reports document. This document can be downloaded from http://support.avaya.com/document/.
Command permissions or user profile
No special permissions needed.
Objects
Object Name |
OID |
R/W |
Type |
Field Name |
Description |
|---|---|---|---|---|---|
Form/Report name |
|||||
avCmListMeasLoadBalTotalYestTable |
.1 |
n/a |
SEQUENCE OF AvCmListMeasLoadBalTotalYestEntry |
n/a |
A list of the avCmListMeasLoadBalTotalYest entries. |
avCmListMeasLoadBalTotalYestEntry |
.1.1 |
n/a |
AvCmListMeasLoadBalTotalYestEntry |
n/a |
A avCmListMeasLoadBalTotalYest entry containing objects of the avCmListMeasLoadBalTotalYest information sent by the switch. |
avCmListMeasLoadBalTotalYestPNNumberIdx |
.1.1.1 |
n/a |
Integer32 (0..99) |
n/a |
An object that uniquely identifies each Increment of data. |
avCmListMeasLoadBalTotalYestPNNumber |
.1.1.2 |
R |
Integer32 (0..99) |
PN |
An object containing the Port Network number. |
avCmListMeasLoadBalTotalYestRunDate |
.1.1.3 |
R |
SnmpAdminString (SIZE (0..27)) |
Date |
An object containing the Date the command was executed. |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestMeasHour |
.1.1.4 |
R |
Integer32 (0..9999) |
Meas Hour |
An object containing Hour the measurement was taken. |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestTDMUsage |
.1.1.5 |
R |
Integer32 (0..999999) |
TDM Usage |
An object containing the sum of the allocated TDM time slots for all 100-second intervals in the measurement period. |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestTDMPeg |
.1.1.6 |
R |
Integer32 (0..99999) |
TDM Peg |
An object containing the number of times that a TDM slot is allocated to the port network. |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestTDMPeak |
.1.1.7 |
R |
Integer32 (0..99999) |
TDM Peak |
An object containing the maximum number of time-slots allocated during the measurement period. |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestTDMBlockage |
.1.1.8 |
R |
Integer32 (0..99999) |
TDM Blockage |
An object containing the total count of TDM blockages that is, the total number of times a TDM time-slot request is denied for the PN. |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestTDMOccupancy |
.1.1.9 |
R |
Integer32 (0..999) |
(PN) Link Time-slots |
An object containing the percentage of time division muliplexed occupancy. Calculated by: TDM occupancy = (TDM usage / total potential usage) * 100Port |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestPNlinkUsage |
.1.1.10 |
R |
Integer32 (0..99999) |
(PN) Link Usage |
An object containing the sum of the allocated PN link slots for all 100-second intervals in the measurement period. |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestPNlinkPeg |
.1.1.11 |
R |
Integer32 (0..99999) |
(PN) Link Peg |
An object containing the total count of circuit switched time-slot seizure attempts for the link(s). |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestPNlinkPeak |
.1.1.12 |
R |
Integer32 (0..99999) |
(PN) Link Peak |
An object containing the maximum number of time slots allocated at any one time on the PN links. |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestPNlinkBlockage |
.1.1.13 |
R |
Integer32 (0..99999) |
(PN) Link Blockage |
An object containing the total count of circuit switched PN blockages, that is, the number of times a PN link time-slot is denied. |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
|||||
avCmListMeasLoadBalTotalYestPNlinkOccupancy |
.1.1.14 |
R |
Integer32 (0..999) |
(PN) Link Occupancy |
An object containing The occupancy of the PN link slots. This value is calculated as: PN link occupancy = (PN link usage / total potential usage) * 100. |
PORT NETWORK LOAD BALANCE STUDY REPORT TOTAL CALLS |
Related information