AVAYA DOCUMENTATION CENTER
Find answers to your technical questions and learn how to use our products
No results found
Search suggestions:
- Use fewer tags and filters.
- Use different search terms.
Filters
AVAYA DOCUMENTATION CENTER
Find answers to your technical questions and learn how to use our products
No results found
Search suggestions:
- Use fewer tags and filters.
- Use different search terms.
Filters
Avaya Aura® Communication Manager SNMP Administration and Reference Guide
avCmServerInfo
Last Updated : Jul 12, 2021 |
MIB group name |
OID |
Type |
|---|---|---|
avCmServerInfo |
enterprises.6889.2.73.8.1.4 |
Scalar |
Description
The avCmServerInfo MIB group displays the general information about the system such as Server Names, Server IP Address, Server State.
Releases Supported
6.3.100 and later
Polling Type
Configuration
Polling Interval
No more than every 15 minutes.
Default Caching Interval
30 seconds
Timeout Interval
Initial Timeout should be set to 15 seconds.
Retry Interval
Initial Retry should be set to 3.
Limitations
Green/Low: The data collected by this MIB Group is minimal and therefore has a low impact on the system.
Associated Communication Manager Commands:
MIB group name |
Bash/SAT |
Associate command |
Form/Report name |
|---|---|---|---|
avCmServerInfo |
Bash |
productid |
Product ID |
Bash |
server |
SERVER STATUS |
Reference Document
A detailed description of the command and form can be found in the Maintenance Commands for Avaya Aura® Communication Manager, Branch Gateways and Servers document. This document can be downloaded from http://support.avaya.com/document/.
A detailed description of the command and form can be found in the Maintenance Commands for Avaya Aura® Communication Manager, Branch Gateways and Servers document. This document can be downloaded from http://support.avaya.com/document/.
Command permissions or user profile
No special permissions needed.
No special permissions needed.
Objects
Object Name |
OID |
R/W |
Type |
Field Name |
Description |
|---|---|---|---|---|---|
Form/Report name |
|||||
avCmServerInfoProductID |
.1 |
R |
SnmpAdminString (SIZE (0..11)) |
Product ID: |
An object that contains Product ID of the server |
SERVER STATUS |
|||||
avCmServerInfoActiveName |
.2 |
R |
SnmpAdminString (SIZE (0..30)) |
n/a |
An object containing the name of aliased active server. |
SERVER STATUS |
|||||
avCmServerInfoActiveIPAddr |
.3 |
R |
SnmpAdminString (SIZE (0..50)) |
n/a |
An object containing the name of aliased active server. |
SERVER STATUS |
|||||
avCmServerInfoServer1Namer |
.4 |
R |
SnmpAdminString (SIZE (0..50)) |
n/a |
An object containing name of Server 1. |
SERVER STATUS |
|||||
avCmServerInfoServer1IPAddr |
.5 |
R |
SnmpAdminString (SIZE (0..30)) |
n/a |
An object containing the IP address of Server 1. |
SERVER STATUS |
|||||
avCmServerInfoServer1State |
.6 |
R |
SnmpAdminString (SIZE (0..20)) |
Mode |
An object containing the current state of Server 1. Valid responses are ‘active’, ‘standby’, ‘dormant’, and ‘busyout’. |
SERVER STATUS |
|||||
avCmServerInfoServer2Name |
.7 |
R |
SnmpAdminString (SIZE (0..30)) |
n/a |
An object containing the IP address of Server 2. |
SERVER STATUS |
|||||
avCmServerInfoServer2IPAddr |
.8 |
R |
SnmpAdminString (SIZE (0..50)) |
n/a |
An object containing the IP address of Server 2. |
SERVER STATUS |
|||||
avCmServerInfoServer2State |
.9 |
R |
SnmpAdminString (SIZE (0..20)) |
Mode |
An object containing the current state of Server 2. Valid responses are ‘active’.‘standby’, ‘dormant’ and ‘busyout’. |
SERVER STATUS |
|||||
avCmServerInfoServerType |
.10 |
R |
SnmpAdminString (SIZE (0..20)) |
Server Type |
An object containing the hardware server type. |
SERVER STATUS |
|||||
avCmServerInfoSurvRemoteConfig |
.11 |
R |
SnmpAdminString (SIZE (0..20)) |
Ipconfig |
An object indicating whether the switch is configured as a survivable remote server/LSP. Possible values are 'icc', 'lsp' and 'unset'. |
SERVER STATUS |
|||||
avCmServerInfoSurvCoreConfig |
.12 |
R |
SnmpAdminString (SIZE (0..20)) |
essconfig |
An object indicating whether the switch is configured as a survivable remote server/LSP. Possible values are 'icc', 'lsp' and 'unset'. |
SERVER STATUS |
|||||
avCmServerInfoStdbyRefresh |
.13 |
R |
SnmpAdminString (SIZE (0..10)) |
Mode |
An object displaying whether the Standby Server is refreshed or not and is it ready to go for an interchange. Possible values are ‘yes’ and ‘no’. |
SERVER STATUS |
Sample output of forms
Dupserver1> productid
Product ID: "1000000000"
dupserver1> server
SERVER STATUS
Cluster ID: 001
Duplication: sw
Standby Busied? yes
Standby Refreshed? no
Standby Shadowing: off
Duplication Link: up
Elapsed Time since Init/Interchange: 8d 00:53:54 (curbs in)
18
dupserver1 dupsever2
ID: 001 (1) ID: 002 (2)
Mode: Active Mode: BUSY OUT
Major Alarms: no Major Alarms: no
Minor Alarms: yes Minor Alarms: no
Control Network: 3 / 3 / 3 Control Network: 3 / 3 / 3
Processor Ethernet: up Processor Ethernet: up
PE Priority: high PE Priority: high
Server Hardware: okay Server Hardware: okay
Processes: okay Processes: okaySample Output of SNMP Walk command:
dupserver1> snmpwalk -v 2c -c public 192.0.2.0 -m /usr/share/snmp/mibs/AVAYA-AURA-CM-MIB.txt avCmServerInfo
AVAYA-AURA-CM-MIB::avCmServerInfoProductID.0 = STRING: 1000000000
AVAYA-AURA-CM-MIB::avCmServerInfoActiveName.0 = STRING: kenny
AVAYA-AURA-CM-MIB::avCmServerInfoActiveIPAddr.0 = STRING: 10.129.178.77
AVAYA-AURA-CM-MIB::avCmServerInfoServer1Name.0 = STRING: kenny1
AVAYA-AURA-CM-MIB::avCmServerInfoServer1IPAddr.0 = STRING: 10.129.178.75
AVAYA-AURA-CM-MIB::avCmServerInfoServer1State.0 = STRING: active
AVAYA-AURA-CM-MIB::avCmServerInfoServer2Name.0 = STRING: kenny2
AVAYA-AURA-CM-MIB::avCmServerInfoServer2IPAddr.0 = STRING: 10.129.178.76
AVAYA-AURA-CM-MIB::avCmServerInfoServer2State.0 = STRING: standby
AVAYA-AURA-CM-MIB::avCmServerInfoServerType.0 = STRING: vmware
AVAYA-AURA-CM-MIB::avCmServerInfoSurvRemoteConfig.0 = STRING: unset
AVAYA-AURA-CM-MIB::avCmServerInfoSurvCoreConfig.0 = STRING: unset
AVAYA-AURA-CM-MIB::avCmServerInfoStdbyRefresh.0 = STRING: noRelated information