Access field descriptions

Last Updated : Mar 19, 2024 |
Prolog information
Metadata
Keywords:
Name
Description
FQDN/IP address
Specifies the FQDN/IP address of the SNMP polling system.
Access
Specifies the access permission for the user:
  • read-only: Community or user can only query for information.
  • read-write: Community or user can query agents for information (SNMPGETs) and send commands to an agent (SNMPSETs).
Community Name
Specifies the SNMP community name. The community name can have a minimum length of 1 and a maximum length of 31 characters. The system does not allow certain characters, such as:
  • `
  • \
  • ‘
  • &
  • (blank)
  • ”
  • ;
  • =
  • ,
User Name
Specifies a user to send traps to a destination. The user name can have a minimum length of 1 and a maximum length of 31 characters. The system does not allow certain characters, such as:
  • `
  • \
  • ‘
  • &
  • (blank)
  • ”
  • ;
  • =
  • ,
Authentication Protocol
Specifies the authentication protocol in use. The options are:
  • MD5
  • SHA
Authentication Password
Specifies a password for authentication and privacy. The password must have a minimum length of 8 and a maximum length of 64 characters. The system does not allow certain characters, such as:
  • `
  • \
  • ‘
  • &
  • (blank)
  • ”
  • ;
  • =
  • ,
Privacy Protocol
Specifies the privacy protocol in use. The options are:
  • DES
  • AES128
Privacy Password
Specifies a password that the user specified in the User Name field must provide for privacy. The password must have a minimum length of 8 and a maximum length of 64 characters. The system does not allow certain characters, such as:
  • `
  • \
  • ‘
  • &
  • (blank)
  • ”
  • ;
  • =
  • ,