AVAYA DOCUMENTATION CENTER
Find answers to your technical questions and learn how to use our products
Avaya Aura® Communication Manager SNMP Administration and Reference Guide
avCmListSigGrp
|
MIB group name
|
OID
|
Type
|
|---|---|---|
|
avCmListSigGrp
|
enterprises.6889.2.73.8.1.84
|
Table
|
Description
The avCmListSigGrp MIB group displays information about the system-administered signaling groups.
Releases Supported
6.3.100 and later
Polling Type
Inventory and Configuration
Polling Interval
No more than once a day when the signaling group administration is changed.
Default Caching Interval
600 seconds
Timeout Interval
Initial Timeout should be set to 20 seconds.
Retry Interval
Initial Retry should be set to 3.
Limitations
Red/High: The data collected by this MIB Group increases as the number of boards in the system increase. Consequently, this data could be very large and therefore may take a very long time to collect and could impact system performance.
Associated Communication Manager Commands:
|
MIB group name
|
Bash/SAT
|
Associated command
|
Form/Report name
|
|---|---|---|---|
|
avCmListSigGrp
|
SAT
|
list signaling-group
|
SIGNALING GROUPS
|
Reference Document
A detailed description of the command and form can be found in the Avaya Aura® Communication Manager Reports document. This document can be downloaded from http://support.avaya.com/document/.
Command permissions or user profile
No special permissions needed.
Objects
|
Object Name
|
OID
|
R/W
|
Type
|
Field Name
|
Description
|
|---|---|---|---|---|---|
|
Form/Report name
|
|||||
|
avCmListSigGrpTable
|
.1
|
n/a
|
SEQUENCE OF AvCmListSigGrpEntry
|
n/a
|
An object containing the avCmListSigGrp entries.
|
|
|
|||||
|
avCmListSigGrpEntry
|
.1.1
|
n/a
|
AvCmListSigGrpEntry
|
n/a
|
An object containing the avCmListSigGrp entry with the information that the switch sent.
|
|
|
|||||
|
avCmListSigGrpIdx
|
.1.1.1
|
n/a
|
Integer32 (0..2000)
|
n/a
|
An object that uniquely identifies each SigGrp group.
|
|
|
|||||
|
avCmListSigGrpGrpNumber
|
.1.1.2
|
R
|
SnmpAdminString (SIZE (0..9999))
|
List Command: Grp No
|
An object that uniquely identifies each signaling group.
|
|
SIGNALING GROUPS
|
|||||
|
avCmListSigGrpType
|
.1.1.3
|
R
|
SnmpAdminString (SIZE (0..14))
|
List Command: Group Type
|
An object containing the signaling group type.
|
|
SIGNALING GROUPS
|
|||||
|
avCmListSigGrpFAS
|
.1.1.4
|
R
|
SnmpAdminString (SIZE (0..2))
|
List command: FAS
|
An object containing the status of FAS for the signaling group.
|
|
SIGNALING GROUPS
|
|||||
|
avCmListSigGrpTrkBrds
|
.1.1.5
|
R
|
SnmpAdminString (SIZE (0..99))
|
List command: Trunk Brds
|
An object containing the number of trunk boards that the signaling group uses.
|
|
SIGNALING GROUPS
|
|||||
|
avCmListSigGrpPriDChannel
|
.1.1.6
|
R
|
SnmpAdminString (SIZE (0..11))
|
List command: Pri D-Ch
|
An object containing the primary D Channel of the signaling group.
|
|
SIGNALING GROUPS
|
|||||
|
avCmListSigGrpSecDChannel
|
.1.1.7
|
R
|
SnmpAdminString (SIZE (0..11))
|
List command Sec D-Ch
|
An object containing the primary D Channel of the signaling group.
|
|
SIGNALING GROUPS
|
|||||
|
avCmListSigGrpMaxNCATSC
|
.1.1.8
|
R
|
SnmpAdminString (SIZE (0..999))
|
List command: Max NCA TSC
|
An object containing the maximum NCA TSC for the signaling group.
|
|
SIGNALING GROUPS
|
|||||
|
avCmListSigGrpMaxCATSC
|
.1.1.9
|
R
|
SnmpAdminString (SIZE (0..999))
|
List command: Max CA TSC
|
An object containing the maximum CA TSC for the signaling group.
|
|
SIGNALING GROUPS
|
|||||
|
avCmListSigGrpMaxNCATSCs
|
.1.1.10
|
R
|
SnmpAdminString (SIZE (0..999))
|
List command: No. Adm’d NCA TSCs
|
An object containing the number of administered NCA TSCs for the signaling group.
|
|
SIGNALING GROUPS
|
|||||
|
avCmListSigGrpNearNode
|
.1.1.11
|
R
|
SnmpAdminString (SIZE (0..16))
|
List command: Near-node
|
An object containing the name of the near-end node of the signaling group.
|
|
SIGNALING GROUPS
|
|||||
|
avCmListSigGrpFarNode
|
.1.1.12
|
R
|
SnmpAdminString (SIZE (0..16))
|
List command: Far-node
|
An object containing the name of the far-end node of the signaling group.
|
|
SIGNALING GROUPS
|
Sample output of forms
Sample Output of SNMP Walk command:
server1> snmpwalk -t 20 -v2c -Os -c private 192.0.2.0 -m /usr/share/snmp/mibss/AVAYA-AURA-CM-MIB.txt avCmListSigGrp
avCmListSigGrpGrpNumber.1 = INTEGER: 1
avCmListSigGrpGrpNumber.3 = INTEGER: 3
avCmListSigGrpGrpNumber.4 = INTEGER: 4
avCmListSigGrpGrpNumber.11 = INTEGER: 11
avCmListSigGrpGrpType.1 = STRING: isdn-pri
avCmListSigGrpGrpType.3 = STRING: sip
avCmListSigGrpGrpType.4 = STRING: sip
avCmListSigGrpGrpType.11 = STRING: h.323
avCmListSigGrpFAS.1 = STRING: y
avCmListSigGrpFAS.3 = STRING: y
avCmListSigGrpFAS.4 = STRING: y
avCmListSigGrpFAS.11 = STRING: y
avCmListSigGrpTrkBrds.1 = INTEGER: 1
avCmListSigGrpTrkBrds.3 = INTEGER: 1
avCmListSigGrpTrkBrds.4 = INTEGER: 1
avCmListSigGrpTrkBrds.11 = INTEGER: 1
avCmListSigGrpPriDChannel.1 = STRING: 01A1324
avCmListSigGrpPriDChannel.3 = STRING:
avCmListSigGrpPriDChannel.4 = STRING:
avCmListSigGrpPriDChannel.11 = STRING:
avCmListSigGrpSecDChannel.1 = STRING:
avCmListSigGrpSecDChannel.3 = STRING:
avCmListSigGrpSecDChannel.4 = STRING:
avCmListSigGrpSecDChannel.11 = STRING:
avCmListSigGrpMaxNCATSC.1 = INTEGER: 0
avCmListSigGrpMaxNCATSC.3 = INTEGER: 0
avCmListSigGrpMaxNCATSC.4 = INTEGER: 0
avCmListSigGrpMaxNCATSC.11 = INTEGER: 0
avCmListSigGrpMaxCATSC.1 = INTEGER: 0
avCmListSigGrpMaxCATSC.3 = INTEGER: 0
avCmListSigGrpMaxCATSC.4 = INTEGER: 0
avCmListSigGrpMaxCATSC.11 = INTEGER: 0
avCmListSigGrpNoAdmdNCATSCs.1 = INTEGER: 0
avCmListSigGrpNoAdmdNCATSCs.3 = INTEGER: 0
avCmListSigGrpNoAdmdNCATSCs.4 = INTEGER: 0
avCmListSigGrpNoAdmdNCATSCs.11 = INTEGER: 0
avCmListSigGrpNearNode.1 = STRING:
avCmListSigGrpNearNode.3 = STRING: procr
avCmListSigGrpNearNode.4 = STRING: clan-1a02
avCmListSigGrpNearNode.11 = STRING: clan-1a02
avCmListSigGrpFarNode.1 = STRING:
avCmListSigGrpFarNode.3 = STRING: vit-sys1-sm2
avCmListSigGrpFarNode.4 = STRING: vit-sys1-sm2
avCmListSigGrpFarNode.11 = STRING: cm1-procr