avCmListMeasMultiMedSumLstHr Group

Last Updated : Oct 26, 2020 |
Prolog information
Metadata
Keywords:
MIB group name
OID
Type
avCmListMeasMultiMedSumLstHr
enterprises.6889.2.73.8.1.150

Description

The avCmListMeasMultiMedSumLstHr MIB Group uses the list measurements multimedia-interface summary last-hour command to retrieve multimedia-interface data from the last hour.

Releases Supported

7.1 and later

Polling Type

Performance/Utilization

Polling Interval

Not more than once in every 6 minutes. However, not more than once in an hour is recommended.

Default Caching Interval

600 seconds

Timeout Interval

Initial Timeout should be set to 20 seconds.

Retry Interval

Initial Retry should be set to 3.

Limitations

Yellow/Medium - The data collected by this MIB Group may have some impact on the system.

Associated Communication Manager Commands:

MIB group name
Bash/SAT
Associated command
Form/Report name
avCmListMeasMultiMedSumLstHr
SAT
list measurements multimedia-interface summary last-hour
MMI SUMMARY REPORT

Reference Document

A detailed description of the command and form can be found in the Avaya Aura® Communication Manager Reports document. This document can be downloaded from http://support.avaya.com/document/.

Command permissions or user profile

No special permissions needed.

Objects

Object Name
OID
R/W
Type
Field Name
Description
Form/Report name
avCmListMeasMultiMedSumLstHrTable
.1
n/a
SEQUENCE OF AvCmListMeasMultiMedSumLstHrEntry
n/a
A list of the avCmListMeasMultiMedSumLstHr entries.
avCmListMeasMultiMedSumLstHrEntry
.1.1
n/a
AvCmListMeasMultiMedSumLstHrEntry
n/a
A avCmListMeasMultiMedSumLstHr entry containing objects of the avCmListMeasMultiMedSumLstHr information sent by the switch.
avCmListMeasMultiMedSumLstHrMeasHourIdx
.1.1.1
n/a
Integer32 (0..9999)
n/a
An object containing the cabinet, carrier, and slot for the specified board.
avCmListMeasMultiMedSumLstHrRunDate
.1.1.2
n/a
SnmpAdminString (SIZE (0..27))
Date
An object containing the Date the command was executed.
MMI SUMMARY REPORT
avCmListMeasMultiMedSumLstHrPeakHour
.1.1.3
R
Integer32 (0..9999)
Peak Hour For All MMIs
An object containing the peak Hour for all MMIs.
MMI SUMMARY REPORT
avCmListMeasMultiMedSumLstHrMeasHour
.1.1.4
R
Integer32 (0..9999)
Meas Hour
An object containing Hour the measurement was taken.
MMI SUMMARY REPORT
avCmListMeasMultiMedSumLstHrAvailablePorts
.1.1.5
R
Integer32 (0..99999)
Avail Ports
An object containing the total network MMI ports in the system (does not include any MMIs that are cabled to an ESM)..
MMI SUMMARY REPORT
avCmListMeasMultiMedSumLstHrAvailableUsage
.1.1.6
R
SnmpAdminString (SIZE (0..6))
Available Usage
An object containing the total time that is available in the system for network MMI ports (in CCS units).
MMI SUMMARY REPORT
avCmListMeasMultiMedSumLstHrTotalUsage
.1.1.7
R
SnmpAdminString (SIZE (0..6))
Total Usage
An object containing the total time, in CCS units, that MMI ports are in use on a call. It includes the time that the ports are out of service or maintenance busy Usage is measured from the time the port is allocated until it is released.
MMI SUMMARY REPORT
avCmListMeasMultiMedSumLstHrTotalAllocation
.1.1.8
R
Integer32 (0..99999)
Total Allocation
An object containing the total number of times that an MMI port was allocated to a call. Keep in mind that a 2-channel call occupies 2 ports, so this number does not necessarily reflect the number of calls that took place. Point-to-point calls do not use MMI resources so these allocations are for conversion calls of multimedia conferences.
MMI SUMMARY REPORT
avCmListMeasMultiMedSumLstHrMMIDenials
.1.1.9
R
Integer32 (0..99999)
MMI Denials
An object containing the total number of times an MMI port was needed but could not be allocated because all ports were busy.
MMI SUMMARY REPORT
avCmListMeasMultiMedSumLstHrOutofService
.1.1.10
R
Integer32 (0..99999)
Out of Srv-CCS
An object containing the total time, in CCS units, that any MMI ports were out of service during any part of the measured interval.
MMI SUMMARY REPORT
avCmListMeasMultiMedSumLstHrPercentAPB
.1.1.11
R
SnmpAdminString (SIZE (0..6))
% APB
An object containing the percentage of time during the measured interval that all MMI ports are unavailable to carry a new call.
MMI SUMMARY REPORT
avCmListMeasMultiMedSumLstHrPercentBlock
.1.1.12
R
SnmpAdminString (SIZE (0..6))
% Blockage
An object containing the percentage of attempted allocations of MMI ports that are not successful (calculated as percent blockage = (MMI Denials/(Total Alloc + MMI Denials)) * 100).
MMI SUMMARY REPORT
Related links
AVAYA-AURA-CM-MIB