avCmListMeasBlockPNToday Group

Last Updated : Oct 26, 2020 |
Prolog information
MIB group name
OID
Type
avCmListMeasBlockPNToday
enterprises.6889.2.73.8.1.118

Description

The avCmListMeasBlockPNToday MIB Group uses the list measurements blockage pn today command to retrieve blockage data for port-networks from today.

Releases Supported

7.1 and later

Polling Type

Performance/Utilization

Polling Interval

Not more than once an hour because the data is only updated near the beginning of the hour.

Default Caching Interval

600 seconds

Timeout Interval

Initial Timeout should be set to 20 seconds.

Retry Interval

Initial Retry should be set to 3.

Limitations

Yellow/Medium - The data collected by this MIB Group may have some impact on the system.

Associated Communication Manager Commands:

MIB group name
Bash/SAT
Associated command
Form/Report name
avCmListMeasBlockPNToday
SAT
list measurements blockage pn today
BLOCKAGE STUDY REPORT

Reference Document

A detailed description of the command and form can be found in the Avaya Aura® Communication Manager Reports document. This document can be downloaded from http://support.avaya.com/document/.

Command permissions or user profile

No special permissions needed.

Objects

Object Name
OID
R/W
Type
Field Name
Description
Form/Report name
avCmListMeasBlockPNTodayTable
.1
n/a
SEQUENCE OF AvCmListMeasBlockPNTodayEntry
n/a
A list of the avCmListMeasBlockPNToday entries
avCmListMeasBlockPNTodayEntry
.1.1
n/a
AvCmListMeasBlockPNTodayEntry
n/a
A avCmListMeasBlockPNToday entry containing objects of the avCmListMeasBlockPNToday information sent by the switch.
avCmListMeasBlockPNTodayPNNumberIdx
.1.1.1
n/a
Integer32 (0..99)
n/a
An object that uniquely identifies each Increment of data.
avCmListMeasBlockPNTodayPNNumber
.1.1.2
R
Integer32 (0..99)
PN
An object containing the Port Network number.
avCmListMeasBlockPNTodayRunDate
.1.1.3
R
SnmpAdminString (SIZE (0..27))
Date
An object containing the Date the command was executed.
BLOCKAGE STUDY REPORT
avCmListMeasBlockPNTodayMeasHour
.1.1.4
R
Integer32 (0..9999)
Meas Hour
An object containing Hour the measurement was taken.
BLOCKAGE STUDY REPORT
avCmListMeasBlockPNTodayTdmUsage
.1.1.5
R
Integer32 (0..9999)
TDM Usage
An object containing the total TDM time-slot usage.
BLOCKAGE STUDY REPORT
avCmListMeasBlockPNTodayTdmPeg
.1.1.6
R
Integer32 (0..99999)
TDM Peg
An object containing the total count of circuit switch TDM time-slot.
BLOCKAGE STUDY REPORT
avCmListMeasBlockPNTodayTdmPeak
.1.1.7
R
Integer32 (0..99999)
TDM Peak
An object containing the maximum number of time-slots allocated at any one time.
BLOCKAGE STUDY REPORT
avCmListMeasBlockPNTodayTdmBlockage
.1.1.8
R
Integer32 (0..99999)
TDM Blockage
An object containing the total count of TDM blockages, that is, the total number of times a TDM time-slot request is denied for the PN.
BLOCKAGE STUDY REPORT
avCmListRoutePatternTGNumber6
.1.1.9
R
Integer32 (0..99999)
(PN) Link Time-slots
An object containing the number of PN link time-slots available between port networks or between Port Networks and Switch Nodes.
BLOCKAGE STUDY REPORT
avCmListMeasBlockPNTodayPNlinkUsage
.1.1.10
R
Integer32 (0..99999)
(PN) Link Usage
An object containing the total circuit switch usage of the available PN link(s) connecting the PN to the SN or to other PNs.
BLOCKAGE STUDY REPORT
avCmListMeasBlockPNTodayPNlinkPeg
.1.1.11
R
Integer32 (0..99999)
(PN) Link Peg
An object containing the total count of circuit switched time-slot seizure attempts for the link(s).
BLOCKAGE STUDY REPORT
avCmListMeasBlockPNTodayPNlinkBlockage
.1.1.12
R
Integer32 (0..99999)
(PN) Link Blockage
An object containing the maximum number of time slots allocated at any one time on the PN links.
BLOCKAGE STUDY REPORT