snmpinctrapconfig

Last Updated : Oct 06, 2020 |
Prolog information
Metadata
Keywords:
Use this command to configure incoming trap. You can either enable or disable a trap.

Syntax:

  • For SNMP v1 and SNMP v2:
    snmpinctrapconfig -v 1|2 -c <comm_name> [-o <comm_name> ] --add | --delete | --change where,  
-v: SNMP version
-c: Community name
-o: Previous community name
--add: Add trap
--delete: Delete trap
--change: Modify trap
  • For SNMP v3:
    : Inform entry
    snmpinctrapconfig –v 3 --inform|--trap  -u <user> [-o <user> ] [ -s authNoPriv|authPriv] [ -a <auth_passwd>]
    [–-auth_prot <protocol>]   
    [-p <priv_passwd>] 
    [--priv_prot <protocol>] --add | --delete | --change where,
-v: SNMP version
–inform: Inform entry
--trap: Trap entry
-u: User name
-o: Previous community name
-s: Security model
-a: Authentication password
--auth_prot: Authentication protocol
-p: Privacy password
--priv_prot: Privacy protocol
--add: Add entry
--delete: Delete entry
--change: Modify entry

Example:

  • Version 1:
    snmpinctrapconfig -v1 -c public --addsnmpinctrapconfig -v1 -c private -o public --changesnmpinctrapconfig -v1 -c private -o public --delete
  • Version 2:
    snmpinctrapconfig -v2 -c public--addsnmpinctrapconfig -v2 -c private -o public--changesnmpinctrapconfig -v2 -c private -o public --delete
  • Version 3:
    snmpinctrapconfig  -v3 --trap -u snmpinctrapname -s authNoPriv -a auth_passwd --auth_protMD5MD5 -e farendengineid --addsnmpinctrapconfig -v3 --trap -u newinctrapname -o snmpinctrapname -s authNoPriv -a auth_passwd --auth_protMD5 --changesnmpinctrapconfig -v3 --trap -u newinctrapname -s authNoPriv -a auth_passwd -auth_protMD5 -a auth_passwd --auth_protMD5 --delete
Following is an example of a command history entry:
<E911 CALL ext:20007! Name:current occupant! Type:4606! IP Address:<111.222.123.204! Mac Address:0205857feb80! Building:hotel! Floor:100th! Room:lobby! Emergency Ext:20007! Tenant Number:1! Dialed Number:911! >