avCmListIpServerIntf

Last Updated : Dec 12, 2023 |
Prolog information
MIB group name
OID
Type
avCmListIpServerIntf Group
enterprises.6889.2.73.8.1.93
Table

Description

The avCmListIpServerIntf MIB Group uses the list ipserver-interface command to retrieve all ip-interface data.

Releases Supported

6.3.100 and later

Polling Type

Inventory and Configuration

Polling Interval

Not more than once a day.

Default Caching Interval

600 seconds

Timeout Interval

Initial Timeout should be set to 20 seconds.

Retry Interval

Initial Retry should be set to 3.

Limitations

Yellow/Medium: The data collected by this MIB Group might have some impact on the system.

Associated Communication Manager Commands:

MIB group name
Bash/SAT
Associated command
Form/Report name
avCmListIpServerIntf Group
SAT
list ipserver-interface
IP SERVER INTERFACE INFORMATION

Reference Document

A detailed description of the command and form can be found in the Administering Avaya Aura® Communication Manager document. This document can be downloaded from http://support.avaya.com/document/.

Command permissions or user profile

No special permissions needed.

Objects

Object Name
OID
R/W
Type
Field Name
Description
Form/Report name
avCmListIpServerIntfTable
.1
n/a
AvCmListIpServerIntfEntry
n/a
A list of the avCmListIpServerIntf entries
avCmListIpServerIntfEntry
.1.1
n/a
AvCmListIpServerIntfEntry
n/a
A avCmListIpServerIntf entry containing objects of the avCmListIpServerIntf information sent by the switch.
avCmListIpServerIntfIdx
.1.1.1
n/a
Integer32 (0..999)
n/a
An object that uniquely identifies each Increment of data.
avCmListIpServerIntfPortNtwkNum
.1.1.2
R
Integer32 (0..999)
PortNtwkNum
An object containing the port network associated with the ipserver-interface.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfPriBdLoc
.1.1.3
R
SnmpAdminString (SIZE (0..6))
Pri Bd Loc
An object containing the location of the primary IP SERVER INTFC board.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfPrimaryIPAddress
.1.1.4
R
SnmpAdminString (SIZE (0..16))
Primary IP Address
An object containing the Primary IP Address.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfPrimaryHostName
.1.1.5
R
SnmpAdminString (SIZE (0..17))
Primary Host Name
An object containing the primary host name.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfPrimaryDHCPID
.1.1.6
R
SnmpAdminString (SIZE (0..10))
Primary DHCP ID
An object containing the DHCP ID.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfServState
.1.1.7
R
SnmpAdminString (SIZE (0..4))
Serv State
An object containing the Service State of the IP SERVER INTERFACE.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfControlState
.1.1.8
R
SnmpAdminString (SIZE (0..8))
Control State
An object containing the Control State of the IP SERVER INTERFACE.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfStateOfHealthCPEG
.1.1.9
R
SnmpAdminString (SIZE (0..8))
State Of Health C P E G
An object containing the state of health of the IP SERVER
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfSecondaryBdLoc
.1.1.10
R
SnmpAdminString (SIZE (0..6))
Sec Bd Loc
Field that displays the secondary board location.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfSecondaryIPAddress
.1.1.11
R
SnmpAdminString (SIZE (0..16))
Secondary IP Address
Field that contains the secondary IP Address.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfSecondaryHostName
.1.1.12
R
SnmpAdminString (SIZE (0..17))
Secondary Host Name
The Secondary Host Name of the IP SERVER INTERFACE.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfSecondaryDHCPID
.1.1.13
R
SnmpAdminString (SIZE (0..10))
Secondary DHCP ID
The Secondary DHCP ID of the IP server interface.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfSecondaryServState
.1.1.14
R
SnmpAdminString (SIZE (0..4))
Secondary Serv State
An object containing the service state of the secondary ipserver interface.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfSecondaryControlState
.1.1.15
R
SnmpAdminString (SIZE (0..8))
Secondary Control State
An object containing the control state of the secondary ipserver interface.
IP SERVER INTERFACE INFORMATION
avCmListIpServerIntfSecondaryStateOfHealth
.1.1.16
R
SnmpAdminString (SIZE (0..8))
Secondary State Of Health C P E G
An object containing the Secondary State of health.
IP SERVER INTERFACE INFORMATION

Sample output of forms

avCmListIpServerIntf - IP SERVER INTERFACE INFORMATION

Sample Output of SNMP Walk command:

server1> snmpwalk -t 20 -v2c -Os -c private 192.0.2.0 -m /usr/share/snmp/mibs/AVAYA-AURA-CM-MIB.txt avCmListIpServerIntf
avCmListIpServerIntfPortNtwkNum.1 = INTEGER: 1
avCmListIpServerIntfPriBdLoc.1 = STRING: 1A01
avCmListIpServerIntfPrimaryIPAddress.1 = STRING: 10.129.136.50
avCmListIpServerIntfPrimaryHostName.1 = STRING: 10.129.136.50
avCmListIpServerIntfPrimaryDHCPID.1 = STRING: ipsi-A01a
avCmListIpServerIntfServState.1 = STRING: IN
avCmListIpServerIntfControlState.1 = STRING: actv-aa
avCmListIpServerIntfStateOfHealthCPEG.1 = STRING: 0.0.0.0
avCmListIpServerIntfSecondaryBdLoc.1 = STRING:
avCmListIpServerIntfSecondaryIPAddress.1 = STRING:
avCmListIpServerIntfSecondaryHostName.1 = STRING:
avCmListIpServerIntfSecondaryDHCPID.1 = STRING:
avCmListIpServerIntfSecondaryServState.1 = STRING:
avCmListIpServerIntfSecondaryControlState.1 = STRING:
avCmListIpServerIntfSecondaryStateOfHealth.1 = STRING: