avCmListMeasExpSumLstHr Group

Last Updated : Oct 26, 2020 |
Prolog information
MIB group name
OID
Type
avCmListMeasExpSumLstHr
enterprises.6889.2.73.8.1.152

Description

The avCmListMeasExpSumLstHr MIB Group uses the list measurements expansion-services-mod summary last-hour command to retrieve expansion-services-module data from the last hour.

Releases Supported

7.1 and later

Polling Type

Performance/Utilization

Polling Interval

Not more than once in every 6 minutes. However, not more than once in an hour is recommended.

Default Caching Interval

600 seconds

Timeout Interval

Initial Timeout should be set to 20 seconds.

Retry Interval

Initial Retry should be set to 3.

Limitations

Yellow/Medium - The data collected by this MIB Group may have some impact on the system.

Associated Communication Manager Commands:

MIB group name
Bash/SAT
Associated command
Form/Report name
avCmListMeasExpSumLstHr
SAT
list measurements expansion-services-mod summary last-hour
MMI SUMMARY REPORT

Reference Document

A detailed description of the command and form can be found in the Avaya Aura® Communication Manager Reports document. This document can be downloaded from http://support.avaya.com/document/.

Command permissions or user profile

No special permissions needed.

Objects

Object Name
OID
R/W
Type
Field Name
Description
Form/Report name
avCmListMeasExpSumLstHrTable
.1
n/a
SEQUENCE OF AvCmListMeasExpSumLstHrEntry
n/a
A list of the avCmListMeasExpSumLstHr entries.
avCmListMeasExpSumLstHrEntry
.1.1
n/a
AvCmListMeasExpSumLstHrEntry
n/a
A avCmListMeasExpSumLstHr entry containing objects of the avCmListMeasExpSumLstHr information sent by the switch.
avCmListMeasExpSumLstHrMeasHourIdx
.1.1.1
n/a
Integer32 (0..9999)
n/a
An object containing the index (based on a 24-hour clock).
avCmListMeasExpSumLstHrRunDate
.1.1.2
R
SnmpAdminString (SIZE (0..27))
Date
An object containing the Date the command was executed.
MMI SUMMARY REPORT
avCmListMeasExpSumLstHrPeakHour
.1.1.3
R
Integer32 (0..9999)
Peak Hour For All MMIs
An object containing the peak Hour for all ESM-MMIs.
MMI SUMMARY REPORT
avCmListMeasExpSumLstHrMeasHour
.1.1.4
R
Integer32 (0..9999)
Meas Hour
An object containing the hour for which these measurements apply (based on a 24-hour clock).
MMI SUMMARY REPORT
avCmListMeasExpSumLstHrAvailablePorts
.1.1.5
R
Integer32 (0..99999)
Avail Ports
An object containing the total network ESM-MMI ports in the system.
MMI SUMMARY REPORT
avCmListMeasExpSumLstHrAvailableUsage
.1.1.6
R
SnmpAdminString (SIZE (0..6))
Available Usage
An object containing the total time that is available in the system for network ESM-MMI ports (in CCS units).
MMI SUMMARY REPORT
avCmListMeasExpSumLstHrTotalUsage
.1.1.7
R
SnmpAdminString (SIZE (0..6))
Total Usage
An object containing the total time, in CCS units, that ESM-MMI ports are in use on a call. It includes the time that the ports are out of service or maintenance busy. Usage is measured from the time the port is allocated until it is released.
MMI SUMMARY REPORT
avCmListMeasExpSumLstHrTotalAllocation
.1.1.8
R
Integer32 (0..99999)
Total Allocation
An object containing the total number of times that an ESM-MMI port was allocated to a call.
MMI SUMMARY REPORT
avCmListMeasExpSumLstHrESMDenials
.1.1.9
R
Integer32 (0..99999)
ESM Denials
An object containing the total number of times an ESM-MMI port was needed but could not be allocated because all ports were busy.
MMI SUMMARY REPORT
avCmListMeasExpSumLstHrOutofService
.1.1.10
R
Integer32 (0..99999)
Out of Srv-CCS
An object containing the total time, in CCS units, that any MMI ports were out of service during any part of the measured interval.
MMI SUMMARY REPORT
avCmListMeasExpSumLstHrPercentAPB
.1.1.11
R
SnmpAdminString (SIZE (0..6))
% APB
An object containing the percentage of time during the measured interval that all MMI ports are unavailable to carry a new call.
MMI SUMMARY REPORT
avCmListMeasExpSumLstHrPercentBlock
.1.1.12
R
SnmpAdminString (SIZE (0..6))
% Blockage
An object containing the percentage of attempted allocations of MMI ports that are not successful (calculated as percent blockage = (MMI Denials/(Total Alloc + MMI Denials)) * 100).
MMI SUMMARY REPORT