Doing an automatic restore using the PC Client

최근 업데이트 : Feb 17, 2021 |

Procedure

  1. From the Controller window, navigate to Tools > Maintenance.

    CMS Supervisor displays the Maintenance window.

  2. Click the Operations tab.
  3. Select Restore Data in the Operations list.
  4. Click OK.

    Supervisor displays the Restore Data window.

    The Status field shows the status of the current restore or a previous restore if one has taken place.

    The Error name field shows any errors found during the restore.

  5. Check the Device Name field to make sure the correct backup/restore device is selected.

    If you want to use another backup/restore device, select Actions > List devices. Enter the correct backup/restore device name in the Device Name field.

    This field defaults to the device named during installation.

  6. Select the Restore from the latest backup? check box.
  7. From the Actions menu, select Run.

    The system notifies you which volumes to mount to restore the data. At the end of every restored volume, the tables that have been fully or partially restored are displayed. If your device is Other, then the backup file is automatically located for you. You only need to press the Continue key to perform the requested restore.

    If the system asks for a tape that you cannot provide, you must cancel the restore process. The restore can be rerun if the tape is found.