This page displays the H.323 and SIP resources that are configured, licensed, and allocated for the system. To accept or initiate a call, a resource must be configured, licensed, and allocated.
Field |
Description |
Zones |
The zones to which telephony resources are allocated.
Note:
This field is displayed only if zones are configured in the system.
|
Type |
The VoIP connection types that are configured and licensed for the system. The options are:
|
Configured |
The number of resources that are configured on the H.323 Connection or SIP Connection pages. |
Licensed |
The number of telephony resources that are licensed by WebLM. If the total number of telephony ports, including announcement ports, specified by the license is sufficient, then all configured VoIP resources are licensed. In this case the value shown in the Licensed column matches the value shown in the Configured column. If the licensed resources are not sufficient, then the licenses are distributed proportionally based on the number of VoIP resources configured. Configured VoIP resources above what is licensed will not be used. |
Allocated |
The number of telephony resources that are allocated to media servers. If the total capacity of the media servers is sufficient, then all licensed VoIP resources are allocated to media servers. In this case, the value shown in the Allocated column matches the value shown in the Licensed column. If the capacity of the media servers is not sufficient, the allocated value is reduced. The Allocated resource cannot exceed the capacity of the media servers. If both H.323 and SIP are configured, then they are reduced in proportion to the licensed value. Licensed VoIP resources for which no media server is available will not be used. |
Details link icon  |
The details link (zoom lens icon) displays additional information for SIP allocations. |
 Zones filter icon |
To filter zones, click this icon located at the right side of the page. The system opens the Zone filter window for selecting one or more zones.
Note:
The system displays the Zones filter icon only when you create new zones. If you do not create any new zones, you do not see the icon.
|