The Trunk Group screen

Last Updated : Sep 08, 2012 |

Procedure

  1. Enter the display trunk-group xx command to view the Trunk Group screen. Where xx is the signaling group number.
  2. Set the Group Type field to isdn.
  3. Set the Carrier Medium field to IP.
  4. Set the Supplementary Service Protocol field to b. 
    display trunk-group 32                                          Page   2 of  22 

    TRUNK FEATURES                                                                 

              ACA Assignment? n            Measured: none      Wideband Support? n

                                     Internal Alert? n        Maintenance Tests? y

                                   Data Restriction? n     
NCA-TSC Trunk Member: 1 
 
                                          Send Name: y      Send Calling Number: y

                Used for DCS? n             Hop Dgt? n

       Suppress # Outpulsing? n    Numbering Format: public 

     Outgoing Channel ID Encoding: preferred     UUI IE Treatment: service-provider

    Replace Restricted Numbers? n

                                                    Replace Unavailable Numbers? n

                                                          Send Connected Number: n

                   Send UCID? y

     Send Codeset 6/7 LAI IE? n

     Path Replacement with Retention? n

     Path Replacement Method: better-route

                                Network (Japan) Needs Connect Before Disconnect? n
  5. Specify a trunk group member in the NCA-TSC Trunk Member field.
  6. You must associate the group member used to make the BSR status polls with an appropriate signaling group. Specify The signaling group in the Sig Grp column. The group member is also specified in the NCA-TSC Trunk Member field on page 2 of the Trunk Group screen.