To assign a routing number including the dial access code that Communication Manager uses to gain access to the interflow Vector Directory Number (VDN) at the remote location. Valid entries can be up to 16 characters long and contain the following characters:

• 0-9

• * or #

• p (pause)

• w/W (wait)

• m (mark)

• s (suppress)

To assign a name with up to 15 characters to each location.

To determine whether Communication Manager must send information to Call Management System (CMS).

Valid entries are:

• y: To prevent Communication Manager from sending information to CMS.

• n: To allow Communication Manager to send the information to CMS.

To assign the maximum poll suppression time. Valid entries are 0 to 60 seconds.

This field value applies when a subsequent consider command replaces a location as the best. For example, if the poll suppression time is 30 seconds, Communication Manager suppresses polling to a remote location for up to 30 seconds.

To assign a name with up to 15 characters to the Best Service Routing (BSR) application plan.

To determine whether Communication Manager must redirect calls. Valid entries are y and n.

To type a location number. Location numbers are identifiers and do not have to be in a sequential order. For example, you can assign locations with the identifiers 1, 3, 14 and 89 to one BSR application plan.

To verify the identifying number of the BSR application plan. This display-only field is numbered from 1 to 255 or 511 based on the server type driving Communication Manager.

To assign a routing number including the dial access code that Communication Manager uses to gain access to the Status Poll VDN at a remote location. Valid entries can be up to 16 characters long and contain the following characters:

• 0-9

• * or #

• p (pause)

• w/W (wait)

• m (mark)

• s (suppress)

To assign a Universal Call Identification (UCID) network node ID for each Communication Manager server. The range for valid network node IDs is from 1 to 32,767.

This field is optional.