Use the following administration commands to administer the Vector Directory Number screen:
Note:
Square brackets [ ] indicate that the qualifier is optional. Single quotes (‘ ’) indicate that you must enter the text inside the quote exactly as shown or enter an abbreviated screen of the word. MAX is the maximum number available in your system configuration.
Command name |
Parameter |
Qualifier |
add |
vdn |
xxxxx or next, where xxxx is the extension number of the VDN. |
change |
vdn |
xxxxx |
display |
vdn |
xxxxx [’print’ or ’schedule’] |
list |
vdn |
xxxx ‘count’ 1-MAX [’print’ or ’schedule’] |
vdn |
bsr xxx, which is the number of a BSR application plan. |
remove |
vdn |
xxxxx |
duplicate |
vdn |
master_ext [start nnnn...] [count xx] |
-
duplicate vdn
-
The command to create up to 16 duplicate VDNs.
-
master_ext
-
The assigned extension number, which can be up to 16 digits, of the VDN you want to duplicate.
-
[start nnnn]
-
An optional parameter that you can use to specify the number from which to start the number sequence for the duplicate VDN. If you do not specify a start number, the first available VDN after the master VDN gets selected automatically. Only one VDN is selected.
-
[count xx]
-
An optional parameter that you can use to specify the number of duplicates. You can create a maximum of 16 duplicates. If you do not specify a start number, the first available VDN after the master VDN is selected automatically. Only one VDN is selected.
