Internal Auto-Answer

Last Updated : Aug 30, 2026 |
Prolog information
Resource Id: 9299
This function is also known as handsfree auto-answer. It sets the user's extension to automatically connect internal calls after a single tone. This function should only be used on phones that support handsfree operation.

Details

  • Action: Emulation | Internal Auto-Answer.
  • Action Data: Optional.
    • If left blank this function acts as described above for internal auto-answer.
    • FF can be entered. In that case the button will enable/disable headset force feed operation for external calls. In this mode, when headset mode is selected but the phone is idle, an incoming external call will cause a single tone and then be automatically connected. This operation is only supported on Avaya phones with a fixed HEADSET button. Ring delay is applied if set on the appearance button receiving the call before the call is auto-connected.  
  • Default Label: HFAns or Auto Answer.
  • Toggles: Yes.
  • Status Indication: Required.
    Status
    1400, 1600, 9400, 9500
    9608, 9611, J100
    9621, 9641
    T-Series,
    On
    Green on
    Green on
    Green
    On
    Off
    Off
    Off
    Grey
    Off
  • User Admin: Yes.
  • Phone Support: Note that support for particular phone models is also dependent on the system software level.
    • 9400 Series, 9500 Series, 9600 Series, and J100 Series.
    • 1400 Series and 1600 Series.
    • M-Series and T-Series.