Configuration Settings
SMTP can be used as the method of sending system alarms. The email destination is set as part of the email alarms configured in .
SMTP can be used with Embedded Voicemail for Voicemail Email. The voicemail destination is set by the user's Voicemail Email address.
|
Field
|
Description
|
|
Server Address
|
Default = Blank
This field sets the IP address of the SMTP server being used to forward SNMP alarms sent by email.
|
|
Port
|
Default = 25. Range = 0 to 65534.
This field set the destination port on the SMTP server.
|
|
Email From Address
|
Default = Blank
This field set the sender email address. Depending of the requirements of the SMTP server this may need to be a valid email address hosted by that server. Otherwise the SMTP email server may need to be configured to support SMTP relay.
|
|
Use STARTTLS
|
Default = Off. (Release 9.0.3).
Select this field to enable TLS/SSL encryption. Encryption allows voicemail-to-email integration with hosted email providers that use secure transport.
|
|
Server Requires Authentication
|
Default = Off
Select if the SMTP server requires authentication. When selected, the following fields become available
|
|
User Name
|
Default = Blank
Sets the user name for SMTP server authentication.
|
|
Password
|
Default = Blank
Sets the password for SMTP server authentication.
|
|
Use Challenge Response Authentication (CRAM-MD5)
|
Default = Off.
Selected if the SMTP server uses CRAM-MD5.
|
