The IP Office can support up to four D100 Base Stations. Each connects to the IP Office using a Legacy SIP DECT Line.
These settings are not mergeable. Changes to these settings requires a reboot of the system.
|
Field
|
Description
|
|
Line Number
|
Default = Blank. A unique line number associated with the SIP DECT Base Station.
|
|
Associated Extensions
|
Lists the SIP DECT extensions associated with the line through the extension's SIP DECT Line setting.
|
|
Base Name
|
Default = Blank. Maximum 16 characters.
A name assigned to the base station. Each base station provisioned on the IP Office must have a unique name. The field cannot be blank. The format is an alphanumeric string with no special characters.
|
|
Base MAC Address
|
Default = Blank.
The MAC Address of the base station. If only one base station is provisioned, the field can remain at the default value. If multiple base stations are provisioned, the MAC address for each base station must be entered.
|
|
Configure Base IP
|
|
Configure Base IP
|
Default = Off.
Set to On to configure IP address attributes for the base station. When enabled, the Configure Base IP settings are displayed.
|
|
DHCP Client
|
Default = On.
When enabled, specifies that the base station operates as a DHCP client. When enabled, not other IP address attributes can be configured.
|
|
IP Address
|
Default = Blank.
The IP address of the base station. The IP address must be on the same subnet as one of the LAN interfaces.
|
|
IP Mask
|
Default = Blank.
IP address mask.
|
|
IP Gateway
|
Default = Blank.
The default gateway address
|
|
Provisioning Server
|
Default = IP Office interface address.
The server address from where the Base Station configuration files can be retrieved.
|
|
|
Description
|
Default = Blank. Maximum 31 characters.
You can use this field to enter a description for the configuration entry. The description is not used elsewhere.
|
