Adding an SMPP connection

Last Updated : Oct 05, 2021 |
Prolog information
Metadata
Keywords:
  1. Log in to the EPM Web interface.
  2. On the EPM main menu, click HomeMulti-Media configurationSMSSMPP Connections.
  3. On the SMPP Connections page, click Add.
    STEP RESULT:
    The system displays the Add SMPP Connection page.
  4. In the Zone field, select the name of the zone.
  5. In the Name field, type the name of the SMPP connection.
  6. In the Enable field, select Yes.
  7. In the Transport Protocol field, select the relevant protocol.
    ADDITIONAL INFORMATION:
    The options available are TCP and TLS.
  8. Enter the host address of the SMS server.
  9. In the Shared field, select the relevant option.
    ADDITIONAL INFORMATION:
    The options available are Yes and No. If you select No, SMS processor is enabled. Otherwise, SMS processor is disabled.
  10. Select the SMS processor from the drop-down box.
  11. Enter the port number.
  12. In the Bind Mode field, select the accurate Bind Mode.
    ADDITIONAL INFORMATION:
    The options are Transceiver, Transmitter, and Receiver.
  13. Enter the user name.
  14. Enter the password.
  15. Enter the address range.
  16. Set the From field to either Short Code or Blank.
  17. Enter the sender ID that can be either a short code or a long number.
  18. Select one or more organizations from the Organization list.
  19. Click the Additional Entry option and enter subsequent short codes or long numbers.
  20. Specify the values for the Advanced Parameters group.
    ADDITIONAL INFORMATION:
    To know about the Advanced Parameters, on the Add SMPP Connection page, click Help.
  21. Click Save.