Starting an MPP server

Last Updated : Dec 05, 2019 |
Prolog information
Metadata
Keywords:
  1. On the EPM navigation pane, click System ManagementMPP Manager.
  2. On the MPP Manager page, ensure that the Mode column saysOnline for the server you want to start.If the mode is Offline, do the following:
    1. Click the selectioncheck box next to the Offline MPP server.
    2. Click theOnline button in the Mode Commands group and confirm your selection when prompted.
  3. Click the selectioncheck boxnext to the MPP server you want to start.
  4. Click Start in the State Commands group and confirm your selection when prompted.
  5. After a few minutes, click Refresh and verify the following:
    ADDITIONAL INFORMATION:
    • Mode is Online.
    • State is Running.
    • Config is OK.
  6. To ensure that all licensed telephony ports are correctly allocated to the MPP server, do the following:
    1. On the EPM navigation pane, click Real-time MonitoringPort Distribution.
    2. On the Port Distribution page, examine the Mode and State columns.