Changing the configuration of an SMS processor

Last Updated : Sep 05, 2024 |
Prolog information
Metadata
Keywords:
  1. Log on to the EPM web interface.
  2. From the EPM menu, click HomeMulti-Media configurationSMSSMS Processors.
  3. Select the check box next to the SMS processor you want to change.
  4. Click the SMS processors that you selected.
    ADDITIONAL INFORMATION:
    EPM displays the Change Processor page.
  5. In the Enable field, select Yes or No.
  6. In the Categories and Trace Levels field, select Customs.
    ADDITIONAL INFORMATION:
    If you select Use SMS Settings, the trace level buttons are disabled.
  7. Select the trace level that you want to set for the SMS Processor.
    ADDITIONAL INFORMATION:
    The following are the options:
    • Off
    • Fine
    • Finer
    • Finest
    ADDITIONAL INFORMATION:
    The default trace level is Off.
  8. Select the trace level that you want to set for the SMS Browser.
    ADDITIONAL INFORMATION:
    • Off
    • Fine
    • Finer
    • Finest
    ADDITIONAL INFORMATION:
    The default trace level is Off.
  9. Click Save.