SIP tab on the VoIP Connections page field descriptions

Last Updated : Jan 13, 2019 |
Prolog information
Metadata
Keywords:
Use this tab to view, add, or change Session Initiation Protocol (SIP) connections on the Experience Portal system.
Tip:
To sort the connections by any column, click the up arrow (sort ascending) or down arrow (sort descending) in the column header.
Column
Description
Selection check box
Use this Selection check box to select which SIP connections you want to delete.
Zone
The name of the zone where the SIP connection is configured.
Zones filter icon
Zones filter icon
To filter zones, click this icon located at the right side of the page. The system opens the Zone filter window for selecting one or more zones.
Note:
The Zones filter icon only appears when you create new zones. If you do not create any new zones, you do not see the icon.
Name
The unique identifier for this SIP connection on the Experience Portal system.
Click the name to open the Change SIP Connection page.
Enable
The options are:
  • Yes: This connection is available for use by the Experience Portal system.
  • No: This connection is disabled.
Proxy Transport
The IP Protocol used by the SIP connection.
The options are:
  • TCP
  • TLS
Proxy/DNS Server Address
The address of the proxy server or the DNS server.
This must be a valid network address in the form of a fully qualified hostname or an IP address.
Proxy Server Port
The port used by the proxy server.
Listener Port
The port used by the Listener.
SIP Domain
The domain in which the SIP connection is configured. The SIP domain must match the domain name of the connected proxy (that is the domain name in SIP URIs for incoming calls).
Add
Opens the Add SIP Connection page.
Delete
Deletes the SIP connections whose associated Selection check box is checked.
Maximum Simultaneous Calls
The maximum number of calls that this trunk can handle at one time.
Enter a number from 1 to 99999.