H.323 tab on the VoIP Connections page field descriptions (view only)

Last Updated : Nov 13, 2013 |
Prolog information
Use this tab to view the H.323 connections on the Experience Portal system.
Tip:
To sort the connections by any column, click the up arrow (sort ascending) or down arrow (sort descending) in the column header.
Column or Button
Description
Zones filter icon
Zones filter icon
To filter zones, click this icon located at the right side of the page. The system opens the Zone Filter window for selecting one or more zones.
Zone
The name of the zone within which the respective H.323 connection is configured.
Name
The unique identifier for this H.323 connection on the Experience Portal system.
Click the name to open the View H.323 Connection page.
Enable
The options are:
  • Yes: This connection is available for use by the Experience Portal system.
  • No: This connection is disabled.
Gatekeeper Address
The network address of the H.323 gatekeeper. The gatekeeper resides on the Communication Manager and acts as the control center for all H.323 VoIP interactions in the Experience Portal system.
Alternative Gatekeeper Address
The network address of the alternate H.323 gatekeeper that resides on Communication Manager. The Gatekeeper address and the Alternate Gatekeeper Address are used for initial contact with Communication Manager, and Communication Manager can instruct the media manager to use other addresses for further communications. For more information on the alternate H.323 gatekeeper, refer to Avaya Aura® Communication Manager Feature Description and Implementation on http://support.avaya.com.
Gatekeeper Port
The port on the gatekeeper that Experience Portal uses for this connection.
Stations
The stations that can use this H.323 connection. If an entry is followed by:
  • (I): the stations are inbound only.
  • (M): the stations are maintenance stations.
  • " " (blank), the stations are both inbound and outbound.
Media Encryption
If this field displays Yes, Experience Portal encrypts all calls that use this connection.