Specify default settings for all the Routing menus and save the values as your default personal settings.
Adaptations
Name
Description
Matching Pattern Min Length
Minimum length of pattern matched for adaptations. The minimum value is 1.
Matching Pattern Max Length
Maximum length of pattern matched for adaptations. The maximum value is 36.
Dial Patterns
Name
Description
Dial Pattern Min Length
Minimum length of dial pattern to be matched. The minimum value is 1.
Dial Pattern Max Length
Maximum length of dial pattern to be matched. The maximum value is 36.
Entity Links
Name
Description
Listen Port
The port to be used for entity links.
Default Transport Protocol for Entity Links
The default transport protocol for entity links to use . The default is TLS.
Domain Management
Name
Description
Suffix
The default suffix to be used for the domain name.
SIP Entities
Name
Description
Type
Type of the SIP entity, such as ASM, CM, Trunk, and Gateway. The default is ASM.
Time Zone
The default time zone to be used for the entity link.
Default Transport Protocol for Ports
The transport protocol to be used by the ports. The default is TLS.
Override Port & Transport with DNS SRV
Override DNS routing. Selecting this option causes the system to use the port and transport values that are administered in the local host name resolution table. The contents for both the Port and Protocol (Transport) fields on the SIP entity form are ignored. If you select the check box, the system performs a full DNS lookup (as described in RFC 3263), and the transport and port information specified in the entity link could be overridden.
Time Ranges
Name
Description
Time Range Start Time
Start time for the time range. Default is 00:00.
Time Range End Time
End time for the time range. Default is 23:59.
Application Settings
Name
Description
Show warning message
Display a warning message if:
You try to navigate to another page when the displayed page has unsaved data.
A data import is in progress.
Button
Description
Restore Defaults
Restore vendor defaults.
Revert
Revert to settings before the last applied settings.
