The date and time when the alarm is generated.

The severity of the alarm.

The current status of the alarm.

The name of the host server that generated the alarm.

For the trap listener service, this column displays the system name.

The IP address of the system that generated the alarm.

A detailed description of the problem that generated the alarm.

The unique identification number assigned to the product, also called the product ID. This number helps in identifying the component that generated the alarm.

For alarms that are generated from the trap listener service, the system displays the System OID.

The unique identifier for an alarm.

The log event ID if the alarm is generated from logs or the Event OID if the alarm is generated from the trap listener service.

The SNMP OID of the alarm.

Displays the details of the selected alarms.

Changes the status of the selected alarm. The options are:

• Raised

• Cleared

• Acknowledged

Changes over to the Auto-Refresh mode. When the Alarming page is set in this mode, it automatically updates the alarms in the table. This is a toggle button.

Exports the selected alarms to a CSV file. You can view the logs using the Wordpad or Excel application.

Exports all the alarms to a CSV file. You can view the logs using the Wordpad or Excel application.

Deletes the alarms that you select from the list.

Deletes all alarms that the system displays on the page.

Displays fields that you can use to specify the search criteria to search for an alarm.

Refreshes the log information in the table.

Displays fields under select columns that you can use to set filter criteria. This is a toggle button.

Hides the column filter fields without resetting the filter criteria. This is a toggle button.

Clears the filter criteria.

Filters alarms based on the filter criteria.

Selects all the alarms in the table.

Clears the check box selections.

Displays the logs in the previous page. This button is not available if you are on the first page.

Displays the logs in the next page. This button is not available if you are on the last page.

Use this section to specify search conditions. Select the search criteria from the first drop down list. Select the operator from the second drop down list. Enter the search value in the text field.

Select the following search criteria from the first drop down list:

• Time Stamp: Searches all alarms that match the specified date and time. The valid format for entering the date is MM/DD/YYYY. The valid format for entering the time is HH:MM.

• Severity: Searches all alarms that match the specified severity level.

• Status: Searches all alarms that match the specified status.

• Host Name: Searches all alarms that are generated from the specified host.

• M/E Ref Number: Searches all alarms that match the specified M/E Ref Number.

• Event ID: Searches all alarms that match the specified Event ID.

• Source IP address: Searches all alarms that are generated from the specified source IP address.

• NotificationID: Searches all alarms that match the specified NotificationID.

• Identifier: Searches all alarms that match the specified identifier.

• Description: Searches all alarms that match the specified description.

The operators available are based on the search criterion that you select in the first drop down field. The following operators are available for search criteria:

• Time Stamp: =, >, <, >=, <=, >=, !=

• Severity: Equals, Not Equals

• Status: Equals, Not Equals

• Host Name: Equals, Not Equals, Starts With, Ends With, and Contains

• Identifier: =, >, <, >=, <=, >=, !=

• Source IP address: Equals, Not Equals, Starts With, Ends With, and Contains

• Event ID: Equals, Not Equals, Starts With, Ends With, and Contains

• Description: Equals, Not Equals, Starts With, Ends With, and Contains

• M/E Ref Number: Equals, Not Equals, Starts With, Ends With, and Contains

When you select Begin Date and End Date from the first drop down list, you are prompted to enter the date in the third field.

Clears the entered search criteria and sets the default search criteria.

Searches the alarms based on the search conditions.

Hides the search fields.

Adds a search condition.

Deletes a search condition.