Displays Default Group.

Displays Default Group.

The default is Location Group.

Non-active field.

The maximum time for a SIP server to keep a SIP client as subscribed. The range is 600–86400 seconds.

The maximum time for a SIP server to keep a SIP client as registered. The range is 600–3600 seconds.

The maximum time a SIP server can reserve a SIP line appearance. The range is 30–240 seconds. The default value is 30 seconds.

The duration a phone must attempt to REGISTER when the proxy server is not reachable or available. The range is 10–3600 seconds. The default is 60 seconds.

The duration a phone waits before proceeding to another proxy server if the phone does not receive a response to a SIP INVITE. The range is 0 -32 seconds. 0 disables this feature. The default value is 4 seconds.

The IP address of a server that can query the phone for SNMP messages. The server must have the correct community string. If this field is blank, any server can query the phone.

You can enter IPv4 or IPv6 addresses in this field.

SNMP community name. This string is a challenge, and a response for the phone and the server specified in the IP Address(es) For SNMP Queries field. If a server IP address is specified, the server and the phone must have the same community name administered. Only alphabetic characters are allowed, and the length cannot exceed 32 characters.

The password that an administrator must enter on a SIP phone to log in and administer the phone. Only numeric values are accepted, and the password cannot exceed 32 digits. This is an optional field.

Code that an administrator must enter on a SIP phone to log in and administer the phone. This field accepts numeric, lowercase, uppercase alphabets, and special characters. This is an optional field.

The Station Access Code retyped for confirmation.

Specify whether users must enter a password when logging in to the phone. The choices are:

• Password Entry Required

• Quick Login Allowed

The IP address of the Avaya VoIP Monitoring Manager server.

You can enter IPv4 or IPv6 addresses in this field.

The port that the Avaya VoIP Monitoring Manager server uses. The range is 1–65,535. The default port is 5005.

The frequency at which an endpoint must send its RTCP packets to the Avaya VoIP Monitoring Manager server. The range is 5–30 seconds. The default value is 5 seconds.

Set the volume in the handset instead of the speaker. The range is 0-10. The default value is 5.

Set the cadence of the ringtone. The range is 1-8. The default value is 1.

Set the ringer setting for the bridged appearance buttons of the station. The range is 1-10. The default value is 5.

Set the volume on the speaker instead of the handset. The range is 0-10. The default value is 5.

Indicates whether VLAN is supported. The VLAN ID field is hidden if this option is not selected.

The range is 0-63. The default value is 46.

The range is 0-63. The default value is 46.

The range is 0-63. The default value is 26.

The range is 0-7. The default value is 6.

The range is 0-7. The default value is 6.

The range is 0-7. The default value is 5.

The time zone of the user. The time zone is provided as a time zone name, for example, America/New_York.

Session Manager provides the time zone to the endpoint in response to the PPM get-AllEndpointConfiguration request from the phone. By default, the time zone field is empty.

The endpoint can locally determine the Daylight Savings settings appropriate to the named time zone from the https://www.iana.org/time-zones/ database.

The IP address type that the endpoints support. Set Signaling Address Mode to one of the following:

• 4: The value defines the IP address of type IPv4.

• 6: The value defines the IP address of type IPv6.

Session Manager sets IP address family settings on the phone in response to the PPM get-AllEndpointConfiguration request from the phone. The endpoints use the IP address family settings to establish Signaling Address Mode.

The IP address type that the endpoints support. Set Media Address Mode to one of the following:

• 4: The value defines the IP address of type IPv4.

• 6: The value defines the IP address of type IPv6.

• 46: The value defines the IP address of type IPv4 and IPv6 with the IPv4 address type preferred.

• 64: The value defines the IP address of type IPv6 and IPv4 with the IPv6 address type preferred.

Session Manager sets IP address family settings on the phone in response to the PPM get-AllEndpointConfiguration request from the phone. The endpoints use the IP address family settings to establish Media Address Mode.

Restore the previous device settings.

Cancel the modified device settings.

Save the modified device settings.