Test command sequences can be either short or long (l). The default is short. The test sequence can be repeated several times. The default is 1.

The following is an example for testing a port on a media module. It runs the short test sequence:

test port GGGVSpp r 3

• GGG = the gateway number (1 - 250)

• V = the literal letter V, which designates a gateway

• S = the media module number (1 - 9)

• pp = the 2-digit port number (01, 02,...)

• r = repeat

• 3 = the number of times the test sequence should be repeated